ID: 2202
Open
Description
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S & P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
PARTE: 12229 – BASTONERA – MOTOR 15
HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
USADA
– MUY BUENAS CONDICIONES
LARGOS MINIMOS: 16”
VELOCIDAD VARIABLE: 75 A 250 PIES LINELES POR MINUTOS
MOTOR PRINCIPAL: 15 HP, 3,600 A 5,000 RPM
MOTOR ALIMENTADOR: 5 HP
TAMANO MAQUINA: 42” W X 48” L X 46” H
TAMANO MAQUINA CON HOPPER: 42” W X 88” L X 46” H
PESO: 3,000 LBS
VARIOS RODILLOS DE ENTRADA Y SALIDA
VARIOS DIAMETROS DE CABEZALES
VARIOS JUEGOS ...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
CENTRO DE MAQUINADO
PARTE # 2MA-949VPKG - CENTRO DE MAQUINADONUEVO CON GARANTIAStandard Features: - Taiwan Mill- “Meehanite” Casting- “Turcite B” Coating on X/Y ways- ISO 9001 certified- Coolant system included- GMM-949V has variable spindle speeds from 70-4,300 rpm - Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion )- Heavy Duty “Meehanite” casting- Hardened & ground dovetail guideways- ...
AMXmachinery
PARTE: 12559 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
PARTE:
12559 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
USADA – BUENAS CONDICIONESElectrical: 208-230/460v, 60hz, 3phSawblade Diameter: 18” approx.Max Cutting Thickness: 5” approx.Max Workpiece Length: 18ft approx.5-Head MachineEach head is equipped with dedicated 7.5hp motor.Each head is equipped with a dedicated chain deck feeders with guide dogs for squaring up and feeding wood to the saw heads.Equipped with (2) integrated 12” wide outfeed conveyors.