Identificador: 1006
Abierta
Descripción
PARTE # 12160 – PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
USADA – MUY BUENAS CONDICIONES
Year of manufacture 2008
Opening width mm 2.800
Veneer thickness min mm 0,3
Veneer thickness max mm 1,5
Strip width min mm 50
Strip width max mm 600
Feed rate max m/min 36
Cross splicing machine Yes
Edge gluing Yes
Trimming unit Yes
Rip cut Veneer clipper
Joint Only edge gluing
Controls and software:
SIEMENS SIMATIC PANEL
CE marking Yes
Total connection kW 25,00
VIDEO DE LA MAQUINA FUNCIONANDO https://vimeo.com/476683911
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA 52"
PARTE # 2TA-WS-DA5275 - LIJADORA - CALIBRADORA - 52" ANCHOCabezales: 2 cabezasCapacidad: 52" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure pos...
AMXmachinery
PARTE: AMX-10165 - EXTRACTOR DE PARED - 20” X 20” - S & P
PARTE: AMX-10165 - EXTRACTOR DE PARED - 20” X 20” - S
& P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”Video: https://vimeo.com/870538431
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
-500x500.jpg)
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...