Identificador: 289
Abierta
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA
PARTE # 2TA-EB-7B - ENCHAPADORA DE CANTOS RECTOS Automatic feed station for: Pre-milling, Gluing, Pneumatic Guillotine, Double End trimming, Top & Bottom Rough Edge Trimming, Corner Rounding & Fine Top & Bottom Fine Edge trimming, Edge Scraping, Grooving, Edge PolishingThe feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.Total enclosure covers with dust hood connector.Heavy and rigid construction to ensure necessary accuracy and stability.To guarant...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Since you are load...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...
AMXmachinery
ROUTER CNC - MODEL R - 15" X 20"
PARTE: 2TA-R-1520 – ROUTER CNC – MESA 15”X 20”3 Axis table top machine easily to do cutting, engraving, routing and etching for signs, sample or small production at the material such as wood, plastic, acrylic, plexi-glass, corian....User friendly iPicture software transfers the images, picture file to 3D cutting program with in a second at superior performance.Optional CAD/CAM system can create and edit part programs then send to machine for cutting. DXF files can be imported, modified a...