Identificador: 1299
Abierta
.jpg)
REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
AMXmachinery
Descripción
PARTE: 2FA-RM6X6-4 - REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
NUEVA CON GARANTIA
- ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Powered Belt Return w/ Adjustable Height Sheer Plate
- Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min)
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 70” L, 93” W, 47” H
- Approx. Weight: 1840 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
PWR_HD_6X6
- Top Mounted Powered Tire Hold Down Wheel
HYD_KIT
6 x 6 RESAW HYD COMPONENTS
(3) - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Self- contained Hydraulic System Runs off First Saw
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 60” L, 90” W, 48” H
- Approx. Weight: 1340 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
HD_SLAVE
- Top Mounted Powered Tire Hold Down Wheel
PWR_HD_HYD KIT
RS6X8 HYD KIT
AIR_HOLD_OVER_SLAVE
RESAW HOLD-OVER KIT FOR SLAVE MODEL
FRAME 6X6_MID
Slave Middle for 6x6 Return Resaw
FRAME_6X8_MID
Slave Mid Frame Rail for Behind 6X8
FRAME_6X8_END
Slave End Frame to Slave Middle or RM6X8
RESAW-(4)15HP_480_PUMP
4 HEAD Control Panel
- (4) 15 HP Blade Motors (230/480/3/60 TEFC)
- (1) 5 HP Pump Motor (230/480/3/60 TEFC)
- 480V Line Voltage
- 24" Tall X 20" Wide Enclosure (UL Type 1,3R,4,12)
- Enclosure Mounted to Hydraulic Pump Stand
- 480V Primary/ 120V Secondary Control Transformer
- Service disconnect in panel door
- (4) 15HP 480V Motor starters, breaker w/OL
- (5) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2, Head 3, Head
4, Hydraulic Pump)
- (1) Emergency Stop Button w/ legend plate
- All controls mounted in plastic remote enclosure
- Completely for 480V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit
Overload Protection
- Controls Mounted at Operators Station
- 85.8 FLA
4 HEAD HYD
4 Head Resaw Pump System
- 40 Gallon Hydraulic Revivor
- 10 GPM Pump
- Pump Stand
STARTUP KIT 1
- 25 Blades
- Extra Set of Guides
- Grease gun with tube of grease
- 9/16 Wrench
- 3/4 Wrench
- 1-1/8 Wrench
- Toolbox
Popular Options
- Multiple Support Heads
- Air Tension Hold Over Plate (For Ripping Material)
- Pre-wired for 230, 480, 575V 3 Phase
- Pre-wired 220V 10HP Motor Single Phase
- Gas Powered Honda GX690 Power Plant
- 6” Height Right Side Fences
- Left Fences for Ripping
*** Other options available
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12603 – MOLDURADORA – LIJADORA – VOORWOOD – A112
PARTE: 12603 – MOLDURADORA – LIJADORA – VOORWOOD – A112USADA - BUENAS CONDICIONESMarca: VoorwoodModelo: A112Número de serie: 1812Voltaje: 440 VAC, trifásicoMaquina molduradora cuenta con motor de fresado con precorte para evitar el despostillado, motor de fresado de corte y dos motores de lijado con velocidad variable.
AMXmachinery
PARTE: 1GS-SFH1516- APILADOR-ESTIBADOR - MANUAL - 1,500 KG
PARTE: 1GS-SFH1516- APILADOR-ESTIBADOR - MANUAL - 1,500 KGNuevo con garantiaCaracteristicas:- Capacidad de carga: 1500 Kg- Altura maxima de elevacion: 64" (1600 mm)- Ancho de las Horquillas: 6" (150 mm)- Ancho entre Horquillas: Ajustable 13.6" - 30" (340 mm - 750 mm)- Largo de Horquillas: 46" (1150 mm)- Ruedas: Nylamid- Garantía:6 meses contra defectos de fabricación- Tamano total: 55.6" x 31.2" x 81.6" (1390 x 780 x 2040 mm)- Entrega : 1 a 4 días
AMXmachinery
BRIQUETEADORA - ENTRADA 55” X 55” X 37” - REDONDO 60 MM
PARTE: 2WE-TH614 - BRIQUETEADORA - ENTRADA 55” X 55” X
37” - REDONDO 60 MM
NUEVA CON GARANTIA
Capacidad: 150-180 lbs/hr
-
Hopper Dimensions: 55.1 x 55.1" x 37" (1,400 x 1,400 x 950 mm)
-
Hopper Configuration: 4 Sides straight
-
Hopper Volume: 2.4 yds³ (1.85 m³)
-
Hydraulic Motor: 12 hp (9 kW)
-
Hydraulic Oil Volume: 42.3 gal (160 liters)
-
Briquette Diameter: 2" (50 mm)
-
Weight: App 2,645 lbs (1,200 kg)
*
Image may not depict actual equipment...
AMXmachinery
ENCHAPADORA
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,- Total enclosure covers with dust hood connector.- Heavy and rigid construction to ensure necessary accuracy and stability.- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.- The top pr...