Identificador: 1299
Abierta
ID de articulo : # 2396 se ha agregado a su lista de deseos.
ID de articulo : # 1345 se ha agregado a su lista de deseos.
.jpg)
REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
AMXmachinery
Descripción
PARTE: 2FA-RM6X6-4 - REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
NUEVA CON GARANTIA
- ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Powered Belt Return w/ Adjustable Height Sheer Plate
- Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min)
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 70” L, 93” W, 47” H
- Approx. Weight: 1840 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
PWR_HD_6X6
- Top Mounted Powered Tire Hold Down Wheel
HYD_KIT
6 x 6 RESAW HYD COMPONENTS
(3) - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Self- contained Hydraulic System Runs off First Saw
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 60” L, 90” W, 48” H
- Approx. Weight: 1340 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
HD_SLAVE
- Top Mounted Powered Tire Hold Down Wheel
PWR_HD_HYD KIT
RS6X8 HYD KIT
AIR_HOLD_OVER_SLAVE
RESAW HOLD-OVER KIT FOR SLAVE MODEL
FRAME 6X6_MID
Slave Middle for 6x6 Return Resaw
FRAME_6X8_MID
Slave Mid Frame Rail for Behind 6X8
FRAME_6X8_END
Slave End Frame to Slave Middle or RM6X8
RESAW-(4)15HP_480_PUMP
4 HEAD Control Panel
- (4) 15 HP Blade Motors (230/480/3/60 TEFC)
- (1) 5 HP Pump Motor (230/480/3/60 TEFC)
- 480V Line Voltage
- 24" Tall X 20" Wide Enclosure (UL Type 1,3R,4,12)
- Enclosure Mounted to Hydraulic Pump Stand
- 480V Primary/ 120V Secondary Control Transformer
- Service disconnect in panel door
- (4) 15HP 480V Motor starters, breaker w/OL
- (5) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2, Head 3, Head
4, Hydraulic Pump)
- (1) Emergency Stop Button w/ legend plate
- All controls mounted in plastic remote enclosure
- Completely for 480V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit
Overload Protection
- Controls Mounted at Operators Station
- 85.8 FLA
4 HEAD HYD
4 Head Resaw Pump System
- 40 Gallon Hydraulic Revivor
- 10 GPM Pump
- Pump Stand
STARTUP KIT 1
- 25 Blades
- Extra Set of Guides
- Grease gun with tube of grease
- 9/16 Wrench
- 3/4 Wrench
- 1-1/8 Wrench
- Toolbox
Popular Options
- Multiple Support Heads
- Air Tension Hold Over Plate (For Ripping Material)
- Pre-wired for 230, 480, 575V 3 Phase
- Pre-wired 220V 10HP Motor Single Phase
- Gas Powered Honda GX690 Power Plant
- 6” Height Right Side Fences
- Left Fences for Ripping
*** Other options available
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLA
PARTE: 12056 – ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLAUSADA – EN BUENAS CONDICIONES
AMXmachinery
GUILLOTINA 8 PIES - ST JOE MACHINES
PARTE: 11756
- GUILLOTINA 8 PIES - ST JOE MACHINES
5 - GUILLOTINA. 8 PIES ST JOE MACHINES CON CUCHILLA DE 90” DE
LARGO ACCIONADA POR UNIDAD HIDRAULICA.
AMXmachinery
LIJADORA ORBITAL
PARTE: 1MK-BO5030 – LIJADORA ORBITAL – DIAMETRO RESPALDO 4-7/8” – 300W - MAKITANuevo con garantíaPoderoso motor 300W y alta duraciónErgonómicamente diseñado con cuerpo cubierto de neopreno para mayor control y confort.Interruptor cubierto de neopreno previene el ingreso de polvo.Respaldo con freno para un bloqueo rápido.Disco abrasivo, bolsa para polvo.Potencia: 300WDiámetro del respaldo: 123mm (4-7/8")Diámetro del disco de lija: 125mm (5")Orbitas por minuto (opm): 12.000Dimension...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...