Identificador: 1028
Abierta
Descripción
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA – 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HR
Standard Features
Cutter Head is Never Exposed
Table Moves w/Dual Air Rams Á Linear Bearings
Double Clamp System
Machine Specs
Dimensions
Length: 60"
Width: 90"
Height: 50"
Table Height: 37"
Power
20 HP Electric Motor: 208/230/480/3/60 TEFC
Completely pre-wired motor starter with start/stop buttons and circuit overload protection
Specifications
Arbor & Bearing Size: 2"
Approx. 2000 lbs
Table Linear Bearings Size: 1-1/4"
Clamp Linear Bearings Size: 1"
Hardened Linear Bearing Shafts
3/8" Thick Steel Table Top
3/8" Thick Steel Framing
8" Dust Ports: 5,000 CFM Recommended
Capacities
Material Width: up to 6"
Material Height: 4"(Standard)
Material Length: up to 60"(Standard)
Standard Notch: up to 9" wide
Adjustable Notch: up to 2-1/2" tall
Up to 800 Stringers Per Hour
Machine Specs
Air System
Operating Pressure: 100 PSI, 20 CFM
Air Cylinder Bore Size: 2"(x4 Cylinders)
Air System Includes: Dual Hand Safety Controls, Lockout Valve, Regulator, Pressure Relief, Reservior, Table Speed Controllers, & Mechanical Valves
Options
Machine Options
Cutter Teeth for Recycled Material
Longer & Taller Capacities
Different Notch Widths
Stand Alone Control Station
Stringer Stacking Racks
Caster Feet
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10146 - EXTRACTOR DE PARED - ASPAS 25” DIAMETRO - COOLAIR
PARTE: AMX-10146 - EXTRACTOR DE PARED - ASPAS 25”
DIAMETRO - COOLAIR
USADO - EXCELENTES CONDICIONES - COMO NUEVO
MEDIDAS: 32” ANCHO X 16” FONDO X 32”
ALTO
ASPAS DIAMETRO: 25”
MOTOR ½ HP, 115V, 1 FASE
2 VELOCIDADES: 1140/1725 RPM
HECHO EN USA
MARCA: COOLAIR
MODELO: CBL/NBF24 SPUN
AMXmachinery
RESISTENCIA ENSAMBLADO ABAJO
PARTE: 2EV-0110.25K – ENSAMBLADO RESISTENCIAS - ¼” COVER ROD REPLACEMENT KITTamaño paquete 166” x 6” x 6”
AMXmachinery
PARTE: 2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCION
PARTE:
2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCIONNUEVA CON GARANTIACon la maquina viene incluido:(1) 7mm Nail Head(1) 10mm Nail Head(1) 12mm Nail Head(1) Single Vertical Positive Placement Clamp(1) Single Metal Pressure Plate(1) Magnetic Support for Vertical Placement
Clamp(1) Blue Rubber Pads (SW)(1) Yellow Rubber Pads (MW)(1) Black Rubber Pads (HW)(...
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...