ID: 961
Open
Description
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum: 7-1/2"
Throat clearance: 750mm (29-1/2'')
2 Speed Spindle: 8,100 / 16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x 101mm (36" x 40")
Table tilt: 45 degree front downward tilt
Micrometric table raise: 1/32" (1mm) per full revolution of hand wheel
35 x 2330mm (1-3/8" x 92") flat belt
Dust port size: (1) 3" requiring 350 CFM at point of extraction
Net weight / Gross weight: 1465 lbs / 1650 lbs
Packing dimensions: (L) 66" x (W) 44" x (H) 71"
(1) Tool box
Warranty is one year parts
All machines are tested stateside prior to shipment providing trouble free start up.
Machine Hp. = 10 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 26 Amps
Configuration = 1/4'' 3/8'' 1/2'' Collet
Spindle RPM = 8100 / 16300 RPM
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Jack Screw / Linear Guides
Total Hp. = 10 Hp.
Electronics = CE Approved Components
Control Voltage = 230 Volt
Throat Capacity = 29-1/2''
Min. Thickness = 1-1/2'' Collet to Table
Max. Thickness = 7-1/2'' Collet to Table
Vertical Travel = 7-1/2''
Dust Collection = (1) 3'' @ 245 CFM
Dust Port Out = 3''
Emergency Stop = Push Button
Guarding = High Visibility Guarding
Operation Style = Pneumatic Foot Pedal
Fence Type = Adjustable Fence
Fence Dims. = 2-1/2'' x 40''
Tiltable = 45 Degrees
Frame Const. = 3/8 Steel Construction
Worktable Dims. = 39-3/4'' x 35-1/2''
Table Const. = Machined Steel
Decible Rating = 73 Db
Net Weight = 1462 Lbs.
Gross Weight = 1647 lbs.
Machine Dims. = 40'' x 62'' x 64''
Packaging Dims = 44'' x 66'' x 71''
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – PILLAR
PARTE: 12380 - CNC TALADRO, ENGOMA,
INSERTA – PILLAR
USADA – MUY BUENAS CONDICIONESClamps
working, software, stops and such in operating condition. This
machine has Windows 7 installed and the electrical cabinet is cleaned out in
addition. The
dowel inserter has been serviced and works correctly.Been
completely gone thru and serviced, with manuals. Machine is 100%2016
model year PILLAR
H-49Machine
Has Been Fully ServicedNew
Injector Service Kit Installed49"
work field2
Z...
AMXmachinery
PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIO
PARTE: 2EV-9265 - PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIONuevo congarantía110 Volt, 1 Phase 60 hz5” casters on the front and 5” fixed wheels in back400 lb lift capacity8” suction cups on a mobile sledOn-board suction pump and accumulator tankAbility to flip panels over 180 degrees.Pivoting option below allows the panel to pivot horizontally on the arm for placement onto a lineOptions:- Pivoting 4 Cup Vacuum Hoist with Rotation Arm and 6' Reach (option 9245)
AMXmachinery
TALADRO MULTIPLE 23
PARTE # 2RT-R823 - TALADRO MULTIPLE - 23 TALADROSNUEVO CON GARANTIA23-Horizontal Gear Driven Spindles32mm Spindle Centers10 Mm Bored Collets(12) Right Hand, (11) Left Hand3,450 Spindle Rpm3 H.P. Spindle Drive Motor, TEFC0-2″ Adjustable Boring Depth20″ X 42″ Precision Ground TableBack Fence Lip(2) End Boring Fences(1) 5-Ton Carriage Adjusting Jack(4) 2.00″ Bore Clamping CylinderWired 3-Phase 480 Volt, 60 Hz.Foot Pedal Actuated Boring CycleNo Tooling IncludedDesigned And Manufactured In Th...
AMXmachinery
PARTE: 2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
PARTE:
2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
NUEVA CON GARANTIAWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motorVideo: https://vimeo.com/668680300
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
from lower ...