Identificador: 2389
Abierta
.jpg)
Descripción
ROUTER DE PEDESTAL 2CK-DR750
Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”. Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.
- Precision Constructed Spindle Assembly: The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.
- 3-Position Depth Stops: A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently
- Spindle Travel: Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.
- Lubrication: Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.
- Rigid Table: The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.
- Drive Belt: Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.
- Collets Included – Double taper type: 1/4″ 3/8″, 1/2″, 5/8″. Metric sizes available as an option: 6, 9, 12mm.
- Guide Pins Included: 1/4″, 3/8″, 1/2″.
- 7.5HP Spindle Motor with magnetic switch.
- Dust cleaning air gun
- Brush ring shroud
- Fence for straight routing
- Dust Hood: 3″ diameter outlet
- Grease: One bottle spread, recommended grade SUN-742EP.
Chuck to table top maximum | 11″ (280mm) |
Throat clearance | 29-1/2″ (750mm) |
Spindle speeds (2 speeds) | 10,000 / 20,000 RPM |
Spindle travel | 3-3/4″ (95mm) |
Depth stops | 3 Position turret stops, adjustable |
Table travel | 7-1/2″ (190mm) |
Table surface area | 36″ x 40″ (915 x 1016mm) |
Table tilt | Front downward to 45degrees |
Micrometric table raise | 3/64″(1mm) per revolution of handwheel |
Collet sizes | 1/4″ 3/8″ 1/2″ 5/8″ |
Spindle drive motor | 7.5HP |
Belt size | 35 x 2330mm |
Net weight | 720kgs (1590 lbs) |
Gross weight | 900kgs (1990 lbs) |
Packing dimensions | 66″ x 44″ x 72″ (L x W x H) |
Machine electrics | 460/3/60 (11 amps) or 230/3/60 (22 amps) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR CENTRIFUGO - EN LINEA
PARTE: 1AM - EXTRACTOR CENTRIFUGO - EN LINEAExtractor centrifugo en línea para acoplamiento en ducto de ventilación en salas de juntas, oficinas, baños, para transportar aire acondicionado en falsos plafones.Características:– Compatible con ductos de 4″ y 6″– Motores con valero y protección de térmica incluye clave y clavija.– Alimentación de 127 Volts.
Modelo
Potencia
WATTS
Volumen
PCM M...
AMXmachinery1
PARTE: 2CK-CD-305 - CASETA DE PINTURA - CONTINUA PARA MOLDURAS
PARTE: 2CK-CD-305 - CASETA DE PINTURA - CONTINUA PARA MOLDURASAllows the automatic in line spraying of lacquers & stains on mouldings, picture frames, door, window & furniture components up to 305mm wide. The wide spraying booth contains 6 spray guns that are automatically timed by photocells to minimize material usage and waste. A PLC control system, equipped with LCD display, checks all the machine functions and setup.6 High Quality, Gold River Spray Guns which are controlled by individual a...
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 3 RUEDAS
PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a horizontal to vertical positioning and everything in b...
AMXmachinery1
TALADRADORA HORIZONTAL
TALADRADORA HORIZONTAL PARTE: 2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The drilling spe...