Identificador: 1792
Abierta
Descripción
PARTE: 2CK-MRS12
FEATURES
- The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Powered Rise & Fall to the pressure rollers
- New style round Fence Bar support with quick shift long fence
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow speed start) and low voltage controls
- C.E style European guard & safety features
- Long fence for control of long material
- Automatic star-delta starter (slow soft-low amperage start) and low voltage controls
- Electrics to 230/460 or575 volts 3 phase 60 cycles – as required to UL/CSA Standards
- With 3 rubber coated hold down rollers at outfeed end of machine
- Overload protection device – Feed speed will slow down automatically if saw motor becomes overloaded
|
Maximum working thickness |
3 3/8” (85mm) with standard pressure shoe *2 ¾” (70mm) with short stock attachment: |
|
Minimum Length |
12” with short stock attachment |
|
Saw Sleeve Usable Length |
|
|
(between outside saws) |
12″ (305 mm) |
|
Sawblade Dia. |
200 to 305mm (8” to 12”) |
|
Saw arbor Sleeve OD (Diameter) |
70 mm |
|
Saw arbor diameter |
50 mm |
|
Saw arbor vertical adjustment |
3.6” (90 mm) |
|
Saw Motor HP |
60 HP 460 volt |
|
Powered Pressure Rollers(Rise/Fall) |
½ HP motor |
|
Saw Arbor Speed |
3800 RPM |
|
Feed Speeds |
25 – 100 FPM |
|
Feed Motor HP |
3 or 5 HP |
|
Voltage |
Machine
can be ordered 230,460, |
|
Table Size |
30” x 60″ |
|
Table Height from floor |
33.5″ |
|
Net Weight |
4510 lbs. |
|
Machine Dimensions |
82.68” 59” x 56 ½” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA MECANICA 8' x 10 Ga
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810MISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm with inch / mm scalespring hold-downs high grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 4-edge indexable bottom bladeFull length with full view finger guardFront supports ...
AMXmachinery1
CORTADORA 144'' X 14 GA
CORTADORA 144'' X 14 GA PARTE: 2GM-HS-1214MISO 9001 certifiedTaiwan machinesQuick Change Blade Gap AdjustmentCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic logic system centrally located and quietHydraulic hold-downs with anti-mar ...
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga PARTE: 2GM-HS-0808MISO 9001 certifiedTaiwan machinesHS-0808M with 24” manual back gaugeQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic lo...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL