Identificador: 1792
Abierta
ID de articulo : # 1792 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-MRS12
FEATURES
- The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Powered Rise & Fall to the pressure rollers
- New style round Fence Bar support with quick shift long fence
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow speed start) and low voltage controls
- C.E style European guard & safety features
- Long fence for control of long material
- Automatic star-delta starter (slow soft-low amperage start) and low voltage controls
- Electrics to 230/460 or575 volts 3 phase 60 cycles – as required to UL/CSA Standards
- With 3 rubber coated hold down rollers at outfeed end of machine
- Overload protection device – Feed speed will slow down automatically if saw motor becomes overloaded
|
Maximum working thickness |
3 3/8” (85mm) with standard pressure shoe *2 ¾” (70mm) with short stock attachment: |
|
Minimum Length |
12” with short stock attachment |
|
Saw Sleeve Usable Length |
|
|
(between outside saws) |
12″ (305 mm) |
|
Sawblade Dia. |
200 to 305mm (8” to 12”) |
|
Saw arbor Sleeve OD (Diameter) |
70 mm |
|
Saw arbor diameter |
50 mm |
|
Saw arbor vertical adjustment |
3.6” (90 mm) |
|
Saw Motor HP |
60 HP 460 volt |
|
Powered Pressure Rollers(Rise/Fall) |
½ HP motor |
|
Saw Arbor Speed |
3800 RPM |
|
Feed Speeds |
25 – 100 FPM |
|
Feed Motor HP |
3 or 5 HP |
|
Voltage |
Machine
can be ordered 230,460, |
|
Table Size |
30” x 60″ |
|
Table Height from floor |
33.5″ |
|
Net Weight |
4510 lbs. |
|
Machine Dimensions |
82.68” 59” x 56 ½” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA ANCHA - 43 PULGADAS
PARTE: 2CK-PS43DACombines a solid machine frame with unparalleled machine features resulting in superior sanding quality & reliability. The dual sanding heads result in less passes through the sander resulting in increased efficiency and throughput. The first sanding head is a steel contact drum with superior calibration capacities and durability. The second head consists of a versatile combination head with rubber contact drum and adjustable sanding platen to perform further calibration o...
AMXmachinery1
PARTE: 2JG-MAG-JUN640CE - SIERRA RADIAL - JUNIOR 640CE - 4 HP - 15.75” DISCO
PARTE: 2JG-MAG-JUN640CE - SIERRA RADIAL - JUNIOR 640CE - 4 HP - 15.75” DISCONueva con garantiaOffer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single Phase Option, 2800 RPM motor400 ...
AMXmachinery1
CEPILLO 1 CARA - 26 PULGADAS
PARTE: 2CK-CM626Is a production planer with high horsepower and feed rates. It is equipped with our spiral insert knife cutterhead with two sided replaceable knives which produce a smooth planed finish with maximum cutting depth. With upper and lower driven feed rollers can plane even the most difficult to feed material. The powerful 20HP motor can ensure optimum stock removal even on full width boards. With infinitely variable feeds the operator has full control to ensure the optimum fe...
AMXmachinery1
TORNO 32'' X 160'' 15 HP
TORNO 32'' X 160'' 15 HP PARTE: 2GM-GML-32160Heavy Duty Precision Gap Bed Lathe 32” x 160” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials.Solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision grou...