Identificador: 1967
Abierta
Descripción
PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGO
- Through feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirements
- Easy loading using hopper ensures maximum throughput capacity reached
- System will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to butt
- System comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.
- Also available in different length capacities to 1500 mm (60”), 2500 mm (98”), and 3050 mm (120”)
|
Range of workpiece length |
10″ – 60”, 98”, or 120” |
250 mm – 1500 mm, 2500 mm, or 3050 mm |
|
Range of workpiece width |
6″ (8” optional) |
150 mm (200 mm optional) |
|
Range of workpiece thickness |
0.8″ – 2.7″ |
20-70 mm |
|
Spindle motor |
3HP x 2 |
3HP x 2 |
|
Spindle speed |
3000 rpm / min |
3000 rpm / min |
|
Spindle diameter |
Ø 1″ |
Ø 25.4mm |
|
Saw blade dia. |
Ø 14″ |
Ø 355.6 mm |
|
Table height |
35″ |
900 mm |
|
Hydraulic pump motor |
3HP x 2 |
3HP x 2 |
|
Waste material conveyor motor |
3000 rpm / min |
3000 rpm / min |
|
Maximum waste cut off length |
3” |
76.2 mm |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TALADRADORA 21 CABEZALES
TALADRADORA 21 CABEZALES PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped with ...
AMXmachinery1
SIERRA DE PANELES AUTOMATICA
PARTE: 2CK-TPS-SH - SIERRA DE PANELES AUTOMATICA Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensions sheet components with a chip free finish. Available in 8’, 10’, 12’ with front loading. The powerful 18HP saw motor and carriage runs on two round hardened guide rails on (8) copper wheels. The saw carriage cutting speed is variably adjusted according to ...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-1504HC - ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cuttin...
AMXmachinery1
CEPILLO 2 CARAS 30" X 8"
CEPILLO 2 CARAS 30" X 8" 2CK-GT760ARDThe Cantek GT760ARD 30″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed ass...