Identificador: 1967
Abierta
Descripción
PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGO
- Through feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirements
- Easy loading using hopper ensures maximum throughput capacity reached
- System will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to butt
- System comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.
- Also available in different length capacities to 1500 mm (60”), 2500 mm (98”), and 3050 mm (120”)
|
Range of workpiece length |
10″ – 60”, 98”, or 120” |
250 mm – 1500 mm, 2500 mm, or 3050 mm |
|
Range of workpiece width |
6″ (8” optional) |
150 mm (200 mm optional) |
|
Range of workpiece thickness |
0.8″ – 2.7″ |
20-70 mm |
|
Spindle motor |
3HP x 2 |
3HP x 2 |
|
Spindle speed |
3000 rpm / min |
3000 rpm / min |
|
Spindle diameter |
Ø 1″ |
Ø 25.4mm |
|
Saw blade dia. |
Ø 14″ |
Ø 355.6 mm |
|
Table height |
35″ |
900 mm |
|
Hydraulic pump motor |
3HP x 2 |
3HP x 2 |
|
Waste material conveyor motor |
3000 rpm / min |
3000 rpm / min |
|
Maximum waste cut off length |
3” |
76.2 mm |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 PULGADAS
PARTE: 2TA-WG-1502H - ASTILLADORA - HORIZONTAL - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
AMXmachinery1
SIERRA CINTA - 24 PULGADAS
PARTE 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum mai...
AMXmachinery1
EXTRACTOR CENTRIFUGO - COCINA INDUSTRIAL
PARTE: 1AM - EXTRACTOR CENTRIFUGO - COCINA INDUSTRIALExtractor centrifugo para montaje en techo con salida vertical para campanas de cocina. Fabricado en aluminio, resistente a la intemperie soportando aire contaminado con grasa con turbinas de curvas atrasadas.Extractor centrifugo para montaje en techo con salida vertical para campanas de cocina. Fabricado en aluminio, resistente a la intemperie soportando aire contaminado con grasa con turbinas de curvas atrasadas.Características:– Acoplam...
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in ...