Identificador: 266
Abierta
Descripción
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA MIDWEST AUTOMATION 2903
PARTE # 11833 - POSTFORMADORA - MIDWEST AUTOMATION 2903En buenas condicionesPostforma produccion continua, ejemplo cubiertas de cocina, etcPostforms modern shapes in a continuous flow-trough operationContactenos para mas informacion y especificaciones
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...
AMXmachinery
AFILADOR SIERRA CINTA 30-40 MM
PARTE # 2LSL-99990000506 - AFILADOR AUTOMATICO - ANCHOS 30-40 MMNUEVA CON GARANTIAAFILA SIERRAS DESDE 30 A 40 MM ANCHO EN 1 SOLA PASADAPARA DIENTES ENTRE 18 A 23 MMThe bandsaw blade grinder shall only be used for bandsaw blades with hardened saw teeth. The pitch shall be 25 mm and the bandsaw blade width shall be 32 mm.Motor Data, Grindlux 4000Voltage, V: 12Speed, rpm: 2800Peripheral speed, m/s: 22Power, W: 90Amperage, A: 7.5Grinding disc, mm: 150 x 6 x 16Fuse, A: 12 / 0.25Weight: 18.1 lbs. (8.2...
AMXmachinery
PARTE: 1SL-DC-DC2042 - COLECTOR DE POLVOS 2 HP
PARTE: 1SL-DC-DC2042 - COLECTOR DE POLVOS 2 HPNUEVO CON GARANTIAMOTOR: 2 HP, 110V, 60 Hz, MONOFASICOCAPACIDAD DE SUCCION: 1,500 CFMNUMERO DE BOLSAS Y FILTROS: 1PESO: 47 KGSTIPO DE EMPAQUE: 1 CAJA