Identificador: 266
Abierta
ID de articulo : # 266 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINATE SLITTER
PARTE # 2EV-5031 - LAMINATE SLITTER - EVANS 5031Laminate Slitter, 31" capacity- 110 Volt, 1 Ph., 1/3 HPStandard Features:- 31" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- 36” Working Height- Crated weight 865 LBS. Shipping dimensions 68” long X 54” wide X 49” highOptional:- 220 Volt 50 Hz (export)
AMXmachinery
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHO
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHONuevo con garantíaFeatures:Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.Precision ground cast iron table for durability.Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.Heavy-duty sheet metal frame.Heavy-duty alloy spindle for durability & run out free performance.Spindle height adjustment by precision rack & pinion gears.Magnetic overload switch fo...
AMXmachinery
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACT - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
NUEVA CON GARANTIA• 5’5” x 10’2” cut capacity; 2-3/8” (60mm) cut depth• 5-1/4hp, 3-ph high-efficiency motor w/ electro-mechanical brake• One-piece full-length centershelf with moveable aluminum fingers• Integral full-length wood support area for small part support• Specially designed measuring stop for use w small partsFlexible and EconomicalThe STRIEBIG COMPACT is the entry leve...