Identificador: 2391
Abierta
.PNG)
Descripción
TALADRO MULTIPLE HORIZONTAL 2CK-BM301
With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The drilling speed is adjustable for optimal cycle speeds. The drilling head is driven by a powerful 2HP direct drive motor. A pneumatic clamp ensures the work piece is held firmly during drilling operations.
- Automatic pneumatic drilling cycle actuated by convenient foot pedal
- Pneumatic clamp holds material firmly in place during drilling cycle
- Adjustable drilling bit center to center spacing from: 71”~3.93” centers (18~100mm)
- Industrial cast iron drilling assembly & table, with fabricated steel base
- Cast iron worktable with miter gauge for angled holes
- Worktable is conveniently adjusted up & down for varying workpiece thicknesses by an adjustment knob and threaded rod
- Adjustable drilling depth with maximum stroke of 4” (100mm)
- Drilling speed can be conveniently adjusted by a speed adjustment knob.
- Powerful 2HP direct drive motor for effortless drilling
INCH | METRIC | |
Number of drills | 2 spindles | |
Adjustable drill spacing | 0.71”~3.93” centers | 18~100mm centers |
Maximum drill stroke | 4” | 100mm |
Drill bit shank | 7/16”-14 Threaded Shank (Both Right Hand Only) | |
Table size | 15.75” x 10” | 400 x 250mm |
Motor | 2HP (230/3/60 = 6.3 amps) | |
Spindle speed | 3450 RPM | |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TORNO 16'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-GML-1440HDThe 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully equipped with a Taper Attachment, 8” 3-jaw chuck with one set reversible jaws, 10” 4-jaw chuck, 12” Face plate, 5 1/2” large steady rest with roller jaws, 2” follow rest, 4-way tools post, Foot brake Coolant system, and so much more list. ISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece so...
AMXmachinery1
ROUTER DE PEDESTAL
ROUTER DE PEDESTAL 2CK-DR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large s...
AMXmachinery1
LIJADORA 63'' x 85'' 40 HP
LIJADORA 63'' x 85'' 40 HP PARTE: 2GM-FP-6385Abrasive belt size: 63” x 85” 10” diameter heavy duty drum for perfect graining3-1/8” wide openingMotorized Table Lift with LED displayVariable Speed ConveyorConveyor Forward & ReverseBelt Safety Overtravel SwitchesElectronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) toRe-adjust the tracking system when running extremely out of parallel belts4-Jackscrew Table SupportDouble Infeed & Outfeed P...
AMXmachinery1
PARTE: 2CK-DWM-36 - ARMADORA DE CAJONES
PARTE:
2CK-DWM-36 - ARMADORA DE CAJONESQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the bottom ...