Identificador: 2571
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 20'' x 40'' PARTE: 2GM-GML-2060
Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HP
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | MT7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Metric threads |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA 4 PIES
CORTADORA 4 PIES PARTE: 2GM-EPS-0412M-1PHShop our 4 foot mechanical shears that are capable of cutting up to 12 gauge mild steel and 16 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring ...
AMXmachinery1
SIERRA CINTA - 24 PULGADAS
PARTE 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum mai...
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...