Identificador: 116
Abierta
ID de articulo : # 116 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFM
PARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFM
PARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFM
Nuevos con garantia
Caracteristicas:
Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.
This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste.
Electronic controls must be protected from weather.
See comparison chart below for specifications.
2EX-DCY-1215 | 2EX-DCY-1220 | 2EX-DCY-1425 | |
|---|---|---|---|
Horsepower | 15 HP | 20 HP | 25 HP |
Standard Leg Set | L1 | L2/L3 | L2/L3 |
CFM | 7600 | 8800 | 10500 |
Amps @ Voltage | 37A @ 230V | 49A @ 230V | 62A @ 230V |
Dimensions | 16'-3" x 73.25" x 73.25" | 23'-11" x 153.5" x 98.5" | 25'-1" x 153.5" x 98.5" |
Opening Dimensions | 74" x 69" x 72" | 164" x 149" x 91" | 164" x 149" x 91" |
Inlet Size | 14" | 16" | 18" |
Outlet Size | 16" | 18" | 20" |
Rotary Airlock HP | 1/4 HP | 1/4 HP | 1/4 HP |
Chip Dumping Capacity | 10 CFM | 10 CFM | 10 CFM |
Drop Size | 8" x 12" | 8" x 12" | 8" x 12" |
Soft Start | Yes | Yes | Yes |
Weight | 2000 lbs | 2500 lbs | 2850 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT PLUS - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACTPLUS - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 181” X 65” X 2-3/8”
NUEVA CON GARANTIAAll of the above, plus:• 15’1” cut length• Split full-length center shelf useful for
staging material• Y-axis digital measuring for horizontal cuts• Six template bar stops for setting common
rip cutsOptional:- For longer XL (6164) frame to cross-cut
17’6”- For taller (207) frames to cross-cut
6’9-1/2”
- For tallest (220) fr...
AMXmachinery
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15”
DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 12” FONDO
AMXmachinery
PRENSA DE TABLEROS - ALTA FRECUENCIA
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROSD - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”New with warrantyMass production for wooden board, 2 to 3 minute for drying a 4' x 8' wooden boardAutomatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of w...
AMXmachinery
ASTILLADOR ELECTRICO
PARTE: 2PT-CSV-2515 – ASTILLADOR ELECTRICO – MOTOR 1.5 HP, 110/120V, 1 FASENuevo con garantíaAstilla ramas hasta 2-1/2” diámetroBueno para limpiar desperdicios de madera, podas, etc.Peso: 50 kgVideo de la maquina funcionando: Video 1