Identificador: 1191
Abierta
ID de articulo : # 1191 se ha agregado a su lista de deseos.
Descripción
PARTE: 12199 - PRENSA FRIA – OMC
USADA – BUENAS CONDICIONES
Cold press 1300mm x 2500mm
Brand OMC Machinery
Mod: PL-90
It can be used for doors or plain surfaces.
Manufacture year 2002
220 Volts
Infeed and out feed band
6 hidraulic pistons 4” width
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR ASERRIN 3 HP
PARTE: AMX-10147 - EXTRACTOR ASERRIN 3 HP
USADO - BUENAS CONDICIONES
MOTOR 3
HP, 208 - 230/460V, 3 FASES, 3500 RPM, WEG SEVERE DUTY
ENTRADA REDONDA: 6.5”
SALIDA CUADRADA: 5” X 5”
MEDIDAS: 22” ANCHO X 19” FONDO X 27”
ALTO
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT PLUS - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACTPLUS - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 181” X 65” X 2-3/8”
NUEVA CON GARANTIAAll of the above, plus:• 15’1” cut length• Split full-length center shelf useful for
staging material• Y-axis digital measuring for horizontal cuts• Six template bar stops for setting common
rip cutsOptional:- For longer XL (6164) frame to cross-cut
17’6”- For taller (207) frames to cross-cut
6’9-1/2”
- For tallest (220) fr...
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...