Identificador: 1265
Abierta
ID de articulo : # 1265 se ha agregado a su lista de deseos.
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO
AMXmachinery
Descripción
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO
Nuevo con garantía
Specification:
1.Max. / Min. Width: 300mm / 40mm
2.Max. / Min. Thickness: 10mm / 35mm
3.Min. Board Length: 270mm
4.Max. Board Length: Unlimited
5.Max. Board Weight: 15kgs
6.Cutterhead Spindle Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2)
7.Feeding Pressure Roller Motor: 1HP W/1HP Inverter
8.Infeed Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1HP Inverter)
9.Cutterhead Feeding Motor (Forward & Backward): 1/2HP W/1HP Inverter
10.Cutterhead Spindle Diameter: Φ40mm
11.Cutterhead Type: TCT Disposable Inserts
(L): 14*14*2.0mm x 12pcs. 11.8*33.85mm x 4pcs.
(R): 14*14*2.0mm x 16pcs. 15*15*2.5mm x 8pcs. 11.8*33.85mm x 4pcs.
12.CutterHead Washer: 0.1 to 0.5, 1, 2, 5, 10, 20mm
13.Cutterhead Inner Dia.: 40mm
14.Cutterhead Travel System: Mechanical Actuators
15.Feed Speed: 90M/min.
16.Processing Speed 24M/min. - Base on 2M Boards
17.Clamping: Clamps on Top and Side
18.Controls: Manual or Automatic
19.Air Service Unit: Norgren
20.Air Consumption: 12CFM
21.Dust Collection Hood: 6" x1
22.RPM of Cutterhead Spindles: 7000RPM
23.Weight: 1100kgs
24.Packing Dimension with Pallet: 2300 x 1300 x 1600mm /1150kgs
25.With Motor In Feed Roller Table: 3300mm(L) & Foot Stand (3sets/unit)
Without Motor Out Feed Table: 2200mm(L) & Foot Stand (2sets/unit)
26.With CE Standard
27._______Volt,_______Hertz
OPTIONAL: In Feed Conveyor (One Section length: 1100mm)
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINADORA 62" RODILLOS PLANOS
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...
AMXmachinery
LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1 HP C/U
PARTE: 2AM-220 - LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1
HP C/UMotors: (2) 1 HP 6 pole 3ph Models & Voltage: 221: 120 or 208-240v / 1ph / 50-60hz222: 208-240v / 1 or 3ph / 50-60hz224: 400-480v / 3ph / 50-60hz Variable Speed: AC Inverter 100-1200 rpm Arbor: 1" Dia. by 6" Tall Vertical Travel: 6" Table Travel: 2" Table Height: 36 inches Table Size: 60" x 24" Air Pressure Required: 80 psi minimum Dust Collection: 3" round, 250 cfm The Model 220 P...
AMXmachinery
PARTE: 4RI-OMNIADB2200 - TALADRO - INSERTADORA PARA TAQUETES / PERNOS - RILESA - OMNIA BD 2200
PARTE:
4RI-OMNIADB2200 - TALADRO - INSERTADORA PARA TAQUETES / PERNOS - RILESA - OMNIA
BD 2200
NUEVO CON GARANTIATools
are not included, are to be purchased separately
High
quality drilling and dowel insertion – a new benchmark in price and capacityDescription:•
Drilling from 4 sides : top, right, left, back•
2 step machine – drilling and doweling•
Doweling from 2 sides (left and right)•
Capacity of up to 18 pcs/min•
Vertical magazine•
One-man operated Extr...
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...