Identificador: 1284
Abierta
ID de articulo : # 1284 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-ET-100 – TROMPO – MOTOR 5 HP – FLECHAS ¾ Y 1-1/4”
Nuevo con garantia
The ET-100 is a powerful and fully customizable machine at a reasonable price. With the optional sliding fence and interchangeable spindles, this machine is a real asset to any shop.
2 spindle speeds: 7,500 and 10,00 RPM
Interchangeable spindles
Reversable
Magnetic starter
micro adjustable fence
Table inserts for multiple cutter diameter
Front and side access panels
Spindle lock
Replaceable hardwood infeed and outfeed fence assembly
Optional sliding table attachment
STD. NEMA size electrical controls
Horsepower: 5HP
Voltage: 230V or 460V
Phase(s): 1PH or 3PH
Main Motor: 5 HP
Spindle RPMs: 7.5 / 10K
CFM Requirements: 480
Table Size: 29" x 23"
Max Diameter: 6"
Spindle Travel: 2-9/16"
Included Spindles: 3/4, 1-1/4"
3/4" Spindle: 2-15/16"
1-1/4" Spindle: 4"
Included Collet Adapters: 1/2"
Interchangeable Spindles: Yes
Sliding Table Travel: 20"
Amps: 15
Weight: 400 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
(2) COMPRESORES DE AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE HORIZONTAL
PARTE: 12405-3 - (2) COMPRESORES DE
AIRE CAPACIDAD DE 500 LTS MOTOR DE 5 HP TANQUE
HORIZONTAL
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
ESPIGADORA SEMIAUTOMATICA DE 2 MESAS CON GRADOS. MOTORES DE 5 HP Y 2 HP
PARTE: 12405-6 - ESPIGADORA
SEMIAUTOMATICA DE 2 MESAS CON GRADOS. MOTORES DE 5 HP Y 2 HP
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2MA-640CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg. On right
side...