Identificador: 1302
Abierta
ID de articulo : # 1302 se ha agregado a su lista de deseos.
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
AMXmachinery
Descripción
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIA
One way feeding only
Work width: 250 mm (25 degrees), 55 mm (60 degrees)
Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variable
Feed speed: 88 m/min (60hz), 73 m/min (50hz)
Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw
2 knife stocks on top and bottom surfaces
Knife type: Changing blade type
Knife size: 335 length x 66 x 8 mm
Accessories: Changing blades and standard tools
Machine size: (WxLxH): 940 x 1920 x 1405 mm
Net Weight : 1,080 Kg
Packing size: (WxLxH): 1200 x 2150 x 1750 mm, G/W: 1,350 kg
Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
REGRESADORA PARA ENCHAPADORA CANTOS - LIGMATECH
PARTE: 12383 - REGRESADORA PARA ENCHAPADORA
CANTOS - LIGMATECH
USADA - BUENAS CONDICIONESLigmatech Model Optimat ZHR
01/L/045 Boomerang for Right-Hand Fed EdgebandersReceiving/Transfer Deck:
81" x 84"Three 18" Catch Belts
Between Edgebander & Return ConveyorBelt Return Conveyor:
31" x 179"32" Idle Rollers for the
End of the ReturnOutboard Support Ball
Transfer Table With Lifting CylindersEight Pneumatic Transfer Arms460v, 3ph
Year: 2006
AMXmachinery
PARTE: 1VX-VI-AG98F - ENCHAPADORA DE CANTOS MANUAL – PRE-ENCOLADOS HASTA 2 MM ESPESOR - VIRUTEX
PARTE: 1VX-VI-AG98F - ENCHAPADORA DE CANTOS MANUAL – PRE-ENCOLADOS HASTA 2 MM ESPESOR - VIRUTEXEnchapadora de Cantos Manual para Chapas o Cintas Pre-EncoladasNueva con garantíaPara el aplacado de cantos preencolados de P.V.C., poliester, melamina y chapa de madera. Permite el aplacado de piezas circulares o con formas. Su especial diseño de mordazas regulables permite realizar el trabajo con una gran precisión y estabilidad. Práctico sistema de corte del canto incorporado. Posibilidad de r...
AMXmachinery
LIJADORA CALIBRADORA SUPERIOR E INFERIOR – 1300 MM (51”) - ANCHO
PARTE: 3UD-SUR1300V – LIJADORA CALIBRADORA SUPERIOR E
INFERIOR – 1300 MM (51”) - ANCHO
NUEVA CON GARANTIA
Rack sheet metal part
1) The lower body is
made of heavy-duty base, which is welded around
the whole with a whole
plate, and the bottom is welded with dense channel
steel and steel plate
connection, which enhances the stability and strength
of the lower body and
ensures that the base is not deformed;
2) The conveying bed is
welded with 18mm thick steel plate...