Identificador: 151
Abierta
ID de articulo : # 151 se ha agregado a su lista de deseos.
Descripción
PARTE # 2SE-DR5-27 - DESCORTEZADORA - 27" CAPACIDAD
Maximum Log Diameter Barked 25”
Minimum Log Length 9’
Number of Debarking Tools 5
Width of Debarking Tools 4”
Maximum Ring Speed 133 rpm
Minimum Horsepower to Operate Ring 60
Maximum Log Feed Speed 221 fpm
Log Feed with 15% Tool Overlap 188 fpm
Hydraulic Pumping Unit 10 hp
Air Pressure Required 90 -100 psi
Machine Weight 35,000 pounds
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PART: AMX-10200-E - COUNTERTOP SAW - 5 HP
PART: AMX-10200-E - COUNTERTOP SAW - 5 HPNEW WITH WARRANTYSAW BLADE 14”MOTOR 5 HP, 220V, 3 PHASESTARTER INCLUDEDMACHINE MEASURES: 1.5 MTS WIDHT X 1.3 MTS LENGTH X 1.1 MTS HEIGHTTABLE HEIGHT: 27.5” (70 CM)OPTIONAL:MOTOR 5 HP, 220V, 1 PHASE
AMXmachinery
SIERRA OPTIMIZADORA – DIMTER WEINIG S90
PARTE: 12392 – SIERRA OPTIMIZADORA
– DIMTER WEINIG S90
USADA – MUY BUENAS CONDICIONES
Incluye 2 empujadores para ClasificarYear
of Manufacture: 2005Condition:
GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT
PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0"
LENGTHS.Working
dimensions: Width 2" to 8"; thickness 3/8" to 2" and length
3' to 14-3/4" (4.5M).Motor:
10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed:
Variable speed PUSH up to...
AMXmachinery
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONESManufactured
in 1999•
Combination sanding head with 5 ½”contact
drum and 3 ½” platen• 20 HP
TEFC Dual Voltage Motor, 460Volt, 3
Phase, 28 Amps• Start,
Stop and E-Stop buttons withmagnetic
starter and locking disconnect• Motor
brake Via E-Stop• 1 HP
feed motor• 37” x
75” Sanding belts• Manual
variable feed speed, 15 – 60 fpm• Manual
thickness adjustment with re...
AMXmachinery
ARMADORA SABANAS
PARTE # 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE # 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1 strip)min. 75 mm (85 mm for 1 strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimension...