Identificador: 1677
Abierta
ID de articulo : # 1677 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICA
Is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 18” blade provide for effortless cutting from 11.8” (w) x 2.75” (t) or 5.9” (w) x 3.9” (t). An optional feature is available for cutting thin material down to 0.078” (2mm) which is ideal for lamellas for engineered flooring.
- Ideal for the defect cutting wood mouldings, wood flooring, finger joint blocks, wood paneling and more!
- Machine scans for defects marked with a florescent crayon allowing for high-speed defecting
- Provides 3 to 5 times higher production rate than manual cut-off saws.
- 5% increase in material yield over manual cutting operations
- +/- 1mm (0.0393”) accuracy
- Safe operation with automatic feeding and comprehensive safety guards
- Partial optimization with sequential and fixed part cutting functions or simply cut out defects
ADVANTAGES
- User friendly touch screen control with on board synoptics, cutting counter, and menu based cutting modes
- Servo driven feed motor for fast accurate motion and position control
- Compact design requires less space than manual cutting setups
- 18” diameter blade provides a large cross cutting capacity
- Powerful 10HP motor running at 3200PRM
- Adjustable automatic trim of front and tail of the workpiece
- 48″ (1.2 meter) long infeed table (Longer available on request)
- 40″ (1 meter) long flat outfeed table
- Defect blowing system combined with computerized logic control permits the blowing time and the length of defect to be set as desired
|
Saw Motor
|
10HP |
|
Saw Spindle Speed
|
3200 RPM |
|
Feed Motor (Servo motor)
|
2.7HP (2Kw) |
|
Max. feed speed
|
Variable to 262 ft/min (80 m/min) |
|
Max. infeed weight
|
44 lbs (20 kgs) |
|
Circular Saw Diameter
|
Ø 18” (455mm) |
|
Saw spindle diameter
|
30mm |
|
Minimum distance between marks
|
0.787” (20mm) |
|
Cutting Size – maximum
|
See the diagram of cutting range |
|
Air pressure: for machine
|
72~85 PSI (5~6 kg/cm2) |
|
Air pressure: defect blowing system
|
7~9 kg/cm2 (99.5~128 PSI) |
|
Dust ports
|
2 @ 4” |
|
Electrics
|
460/3/60 = 14 Full Load amps (Stock Machine) |
|
Electrics
|
230/3/60 = 28 Full Load amps (Factory order) |
|
Electrics
|
575/3/60 = 11 Full Load amps (Factory order) |
CUTTING RANGES
- Max. Cutting Range (WxH) – 11.8” x 2.75” (300x70mm) OR 5.9” x 3.9” (150x100mm) with 18” Blade – Inches = mm x .03937)
- Min. Thickness = 0.4” (10mm) (Optional Thin Hold Down Device available to min thickness .078” (2mm)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA MECANICA 8' x 10 Ga
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810MISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm with inch / mm scalespring hold-downs high grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 4-edge indexable bottom bladeFull length with full view finger guardFront supports ...
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga
CORTADORA DE METAL HIDRAULICA 8' x 8 Ga PARTE: 2GM-HS-0808MISO 9001 certifiedTaiwan machinesHS-0808M with 24” manual back gaugeQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and sturdy all steel machine frameGerman made Hydraulic lo...
AMXmachinery1
ALIMENTADOR CON VELOCIDAD VARIABLE
ALIMENTADOR CON VELOCIDAD VARIABLE PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a...
AMXmachinery1
SIERRA MULTIPLE - 16 PULGADAS
PARTE: 2CK-MRS350FEATURESThe Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with Heavy Guided Chain. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel 55mm dia. Saw Arbor with 70 mm OD with dble. keyed Quick Removal SleevePowered Rise & Fall to the Pressure RollersNew style round Fence Bar support with Quick-Shift Long FenceLong Infeed Fence with Heavy Round Bar for moun...