Identificador: 1740
Abierta
ID de articulo : # 1740 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-GT635ARD
Has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.
- Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
- Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
- Heavy-duty cast-iron machine body and table for vibration free cutting
- Digital electronic thickness adjustment in INCH and MM (Inch = 0.001” / mm = 0.01mm resolution) for precise thickness control
KEY ADVANTAGES
- 25″ x 8″ capacity as standard with optional 16″, 20″, 24″ thickness capacity
- Cutterheads are spiral insert type with six (6) rows of carbide inserts
- (2) driven and (1) idle bed roll for superior feeding of even difficult material
- Swiveling control panel for more ergonomic access to machine controls
- Inverter variable speed control with feed speeds from 26 to 80 FPM
- Easy to access external handwheel adjustment of infeed bed
- Hard chromed worktable for high wear resistance
- Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
- Section chipbreaker and sectional feed roller before top cutterhead
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Ammeter for each motor on control panel to monitor motor load
|
Max. working width |
25″ |
|
Max. working thickness |
8″ (16″, 20″, 24″ optional) |
|
Min. workpiece length |
12.2″ |
|
Bottom head motor |
20 HP |
|
Top planing head motor |
25 HP (30 HP optional) |
|
Feed motor |
5 HP |
|
Table elevation motor |
1/2 HP |
|
Knife dimensions |
30mmx12mmx1.5mm (96 pcs per head) |
|
Cutterhead speed |
5400 RPM |
|
Feed speed (variable) |
26-80 FPM |
|
Machine dimensions (LxWxH) |
105″ x 45.1″ x 67.7″ |
|
Net weight |
6600 lbs |
|
Gross weight |
7700 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 10 HP
COLECTOR DE POLVOS - 10 HP - 2CK-DBS10Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP . Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...
AMXmachinery1
TORNO 32 x 120''
TORNO 32 x 120'' PARTE: 2GM-GML-32120Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is supported a...
AMXmachinery1
PERFORADORA DE CLAVIJAS
PERFORADORA DE CLAVIJASOne-man operated dowel drilling machines • Drilling from 4 sides : top, right, left, back• Capacity of up to 22 pcs/min• Vertical magazine• One-man operatedExtra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste ConveyerLength:160 – 1500 mm160 – 2200 mmHeight:10 – 40 mmWidth:25 – 250 mm