Identificador: 1883
Abierta
ID de articulo : # 1883 se ha agregado a su lista de deseos.
Descripción
PARTE: AMX-10134 - EXTRACTOR DE TURBINA - 1 HP
USADO - BUENAS CONDICIONES
MEDIDAS: 16” ANCHO X 16” FONDO X 20” ALTO
ENTRADA REDONDA 6”
SALIDA RECTANGULAR 4” X 3.5”
Pago y Devoluciones
- Forma de pago
- PayPal, Visa/Mastercard/American Express
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- comprador puede recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA
DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES3
HP TEFC Dual Voltage MotorsWired
for 460 Volt, 3 PhaseStart
and E-Stop buttonsLeft
head fixed, Right head manually position via hand crankMinimum
Cut Length @ 90 = 13”Maximum
cut length @ 90 = 100”Both
heads rotate inward 90 to 45 degreeBoth
heads tilt outward to 45 degree for compoundTwo
hand anti tie down cycle control on pedestalBuilt
in 3rd party hydro-checkPne...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
REASERRADORA 3 SIERRAS 12"
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
SIERRA DIMENSIONADORA - RAYCO
PARTE: 11884 – SIERRA DIMENSIONADORA - RAYCO
UsadaMedidas de envío quitando las 2 mesas laterales: 490 cm largo x
120 cm ancho x 160 cm alto, 2000 kg