Identificador: 1924
Abierta
ID de articulo : # 1924 se ha agregado a su lista de deseos.
Descripción
PARTE: 1ES-050 - SIERRA TRIMMER - 2 MOTORES 5 HP CU - CAPACIDAD 24” - 60”
NUEVA CON GARANTIA
ABERTURA MINIMA: 24”
ABERTURA MAXIMA: 60”
2 MOTORES 5 HP, 220/440V, 3 FASES C/U
ESPESOR MAXIMO: 1-1/2”
ANCHO MAXIMO: 4”
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: AMX-10129 - EXTRACTOR DE TUBO - ASPAS 18” DIAMETRO - MOTOR ½ HP - CINCINNATI FAN
PARTE: AMX-10129 - EXTRACTOR DE TUBO - ASPAS 18”
DIAMETRO - MOTOR ½ HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 280/440V, 3 FASES
MEDIDAS: 18” DIAMETRO INTERIOR X 20”
DIAMETRO EXTERIOR X 20” FONDO
MODELO: 1863T3/4
HECHO EN USA
6,500.00 MXN
AMXmachinery
PARTE: 12321 - DOBLADORA DE CORTINA - 6'6" x 10 GA
PARTE: 12321 - DOBLADORA DE CORTINA
- 6'6" x 10 GA
USADA - BUENAS CONDICIONESModel no. QHD-6020Bending capacity:
6'6" x 10 ga. mild steelTonnage
capacity: 70
tonsOverall length of bed & ram: 80"Distance between housings: 61"Stroke:
6.3"Open
height:
12.2"Throat
depth:
13"Width of
bed:
4.9"Speeds
approx....
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROS
PARTE:
2PG-TNF283 – HORNO PARA CERAMICA, VIDRIO, METALES – 299 LITROSNuevo con garantiaThe massive, 12-sided digital TnF-28-3 is a profit center of the busy ceramic studio. It eats up stacks of low-fire ware. At a cost per cubic foot, the TnF-28-3 is one of the most economically priced standard kilns we make.The TnF-28-3 now features sectional construction. Separate the kiln bottom and sections to repair bricks, change elements, or to move the kiln down narrow stairwells or through the narr...