Identificador: 1930
Abierta
ID de articulo : # 1930 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12134 – PRENSA CALIENTE – 5 PLATOS
PARTE: 12134 – PRENSA CALIENTE
– 5 PLATOS
USADA – EN BUENAS CONDICIONES
4' x 8'
52" x 100" x 1.750" platens
3" of daylight
500 ton capacity
120 gallon hydraulic unit with 6 hp volume pump
7 hp-3600 rpm high pressure pump
-500x500.jpg)
AMXmachinery
BASTONERA 1/2" - 2"
PARTE # 2TA-RM70 - BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Capacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: 40” x 40” x 40”La maquina incluye cabezal para 7/8” con cuchillas de acer...
AMXmachinery
PART: 1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH
PART:
1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH
SIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines
7
galvanized steel ball bearing rollersOptional:
- Custom lengths
AMXmachinery
LIJADORA 36"
PARTE # 2SS-3760-10 - LIJADORA - 36" ANCHO - 1 LIJA - 10 HP 1 FASEPARTE # 2SS-3760-15 - LIJADORA - 36" ANCHO - 1 LIJA - 15 HP 3 FASESLijadora - CalibradoraCabezales: 1 cabezasCapacidad: 36" ancho Standard EquipmentPhoto electric belt tracking.2 1/2″ removable platen.2 height adjustment indicators.5 emergency stops.2 rubber-covered pinch rollers 1 1/2″ OD.Rubber-covered contact roller 4 1/4″ OD with 13/8″ drive bearing.2 machined idler rollers 2 3/16″ OD with 3/4″ bearings.Conveyor t...