Identificador: 2075
Abierta
Descripción
PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90
USADA – MUY BUENAS CONDICIONES
- Incoming Lengths up to 248" (20')
- Widths 3/4" Min to 14-1/4" Max
- Thickness 3/8" Min to 4" Max
- Automatic Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be Stored. Input up to 200 Lengths per Cutting List is Possible
- Saw Motor 10HP
- Saw Blade Diameter 20-1/2"
- Swiveling Positioning Pusher Including Laser Photo-eye for Automatic Length Detection
- Lateral Pressure Unit for More Dynamic Positioning and Rectangular Cut
- Advance Speed up to 393' /min.
- Speed at Return Stroke up to 787'/min.
- Accuracy Package for Positioning of Pusher +/- 0.1mm
- Automatic Start After Workpieces have been Inserted
- Wide Infeed Table
- Integrated Waste Gate Electro-pneumatically Actuated
- Max. Waste Length Approx 4-3/4"
- Outfeed Conveyor Belt / Sorting Station with Drive Unit 25'
- Two (2) Pneumatic Kickers
- nd of belt can also be used in an additional sort for long fixed length parts, finger joint blocks, or long waste
- New in 2007
- 480v, 3ph
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...
AMXmachinery
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTO
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTOUsada - Buenas condicionesWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide x 12" high cant capacityCurrently just under 50 hours of use
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285