Identificador: 223
Abierta
ID de articulo : # 223 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
PARTE: 12407 - ASTILLADOR - 60 HP - VERTICAL - VECOPLAN
Usado - Buenas CondicionesStretch
Slow Speed60
HP Motor
Control
Panel
AMXmachinery
CORE BUILDER
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...
AMXmachinery
PARTE: 12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
PARTE:
12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
Usada - En Buenas CondicionesEffective
Working Size: 98″ L x 55″ H x 27″ DeepMin.
Effective Working Size: 8″ L x 10″ HAutomatic/Manual
MotorizedAdjustment
of vertical and horizontal beams(2)
1.5 HP motorsJoy-stick
for manual movementClamp
timerCondition:
Cleaned/Checked
Electrical:
230V, 3PH
AMXmachinery
GUILLOTINA DOBLE HOJA
PARTE # 11933 - GUILLOTINA DOBLE HOJA - MONGUZZIMod. TRM-2L 3600Doble hojaHidráulicaLargo máximo de trabajo 3600mmAncho de corte entre cuchillas 520mmVoltaje 400V-50HzPotencia instalada 10kWPeso 12.000 KgAño 2005Buen estado // Comprobado su funcionamiento antes de la entrega.