Identificador: 2395
Abierta
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
ENLAZADORA DE CAJONES AUTOMATICA 2CK-JDT75
Workpiece Dimensions
Display your quality and are built to last, producing beautifully aesthetic dovetails for drawer box production from a wide range of wood types, including plywood and solid wood. This fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.
- High-quality finish in both plywood and solid wood drawer box material
- Fast operation with up to 40 drawer boxes produced in an hour
- Solid cast iron machine structure for vibration-free dovetailing leading to a long machine life
- Superior finish with two flute dovetail bit
- 21500 RPM spindle for an extremely fine finish on dovetail joints
- Independent adjustment of both the tenon & the mortise depth for precise fitting of dovetail joints
- Cast iron base to ensure vibration free cutting
- Pneumatic clamping for fast component changeover
- (3) cycle speeds for best finish results
- Automatic lubrication system to spindle stroke
- Dust hood for milling cutter
- Safety rail in front of spindle motor
- Straight or spiral dovetail bits available
Fixed pitch | 25mm |
Spindle speed | 21,500 RPM |
Spindle diameter shank | 0.472” (12mm) |
Spindle motor | 2 HP |
Feed motor | 2 HP |
Electrics | 230/3/60 = 13.6 Full Load Amps |
Feed speeds (3) | 16, 22, 31 cycles/min |
Net weight approx | 990 lbs. |
Shipping weight | 1210 lbs. |
Shipping dimensions | 55.12” x 34.65” x 55.12” |
Workpiece Dimensions
Working length | min. 7.87” (200mm) to max. 59” (1500mm) |
Working width | min. 2.36” (60mm) to max. 16.93” (430mm) |
Vertical material thickness | 0.275” (7mm) to 2.36” (60mm) |
Horizontal material thickness | 0.394” (10mm) to 1.18” (30mm) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DOBLADORA DE METAL 4' X 3/16''
DOBLADORA DE METAL 4' X 3/16'' PARTE: 2GM-04316EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is power...
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 10' X 10 GA
CORTADORA DE METAL HIDRAULICA 10' X 10 GA PARTE: 2GM-HS-1010MISO 9001 certifiedTaiwan machinesHS-1010M comes with 24” manual back gauge, one side handwheel operate )adjustment 0.004” , inch/mm digital displayQuick Change Blade Gap Adjustment (BGA), with gap dialShadow line for accurate straight cutting60” squaring arm with inlaid inch/metric dual scaleCE standard “OMERO” electric control systemMeet OSHA safety standard codeAdjustable cutting length and s...
AMXmachinery1
TALADRO MULTIPLE - SISTEMA 29
PARTE: 2JG-MAG-SYSTEM29 - TALADRO MULTIPLE - SISTEMA 29Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(3) patented quick release material clamps with auto-setting to firmly hold ...
AMXmachinery1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...