Identificador: 244
Abierta
ID de articulo : # 244 se ha agregado a su lista de deseos.
Descripción
PARTE: 2UK-PW35-F5-E - RECUBRIDORA DE MOLDURAS
- Six meters, long steel construction bedframe, composed of 19 groups of synchronized transport wheels of 15mm width driven by a frequency inverter controlled motor (1.5 kW) with speed variation from 10 up to 47 m/min. Through an helicoil screw spindles gear transmission.
STANDARD EQUIPMENT
- Quick adjustable guides for profile Access ( EASY FEEDING)
- Top cleaning brush, 0.37 kW motor power, rotating at 900 rpm.
Brush 300 x Ø 140 mm with protection cover and dust outlet Ø 60 mm
- Side cleaning brushes, 0.18 kW motor power, rotating at 1500 rpm.
- Brushes 100 x Ø 140 mm with protection cover and dust outlet Ø 60 mm
- Profile preheater ( 3pcs.)
- Case for Glue (EASY CLEANING)
- Moveable operator control panel (EASY CONTROL)
- Digital conveyor speed display
- 6 inches (Ø 152 mm ) unwinding stations with pneumatic brake and expansible air shaft for Roller applicator
- EVA& APAO glue melting tank with 20lt volume and Heat control seperately at two parts of body for reducing Power supply. (2000 W * ‘ Pcs – Cylinder Resistance)
- Special Glueing roller for Veneer Wrapping (350mm Max.)
- Applicator Heater (1500 W* 3 Pcs.)
- 6 pieces hot air fan for core preheating or glue reactivation
- 152 pieces standard and special wrapping tools.
- Security system with cable for emergency stop along the whole machine accordingto EC standarts.
TECHNICAL FEATURES
- Glue Type: EVA or APAO glue.
- Profile Type: MDF , Chipboard, Solid Wood Profiles
- Foil Type: P.P., Paper, Finished Foils, and Veneer (Roll & Strip)
- Foil Width: From 20 mm to 350 mm.
- Profile Width: 200 mm. Max.
- Profile Height: 125 mm. Max.
- Dimensions: 6000x850x2200
- Weight: 2250 kg
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.