Identificador: 247
Abierta
Descripción
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALES
NUEVA CON GARANTIA
CARACTERISTICAS
220V/60HZ/3PH
1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP
2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP
3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP
4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HP
Feeding motor: 3Kw – 4 HP
Stepless variable feed speed 10-33m/min
Feed beam :0.75kW
Working width: 20-130mm
Working thickness: 8-100mm
Individual motor to each spindle to ensure maximum cutting(Standard)
Hard chrom treatment has been adopted for the durability of the work table surface(Standard)
Equip with short-piece gear box for the shortest length of 180mm
Lengthened-type side pressure roller at the infeed entrance for effectively prevent wood running deviation
Multi-section pneumatic adjustment is adopted to the conveying pressure system
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
PARTE:
2EB-JMA-8 - ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
NUEVA CON GARANTIAFeatures include:Reversible KnivesAdjustable BedbladeSafety Bar - to disengage the Feed RollerRotating Exit ChuteSpecifications include:Chips 8" wood, with Opening size of 8"X8"PTO Driven at 540 RPMFeed Rate is 36 Feet per minute185Lb Flywheel, with Total Weight of approx 850 LbsRecommended for 18-45 HP tractors
Some
basic assembly is required.
AMXmachinery
PARTE: 2CA-DM77 - BASTONERA PARA MADERA - 1/4" - 3/4" DIAMETRO - TAQUETES RAYADOS
PARTE: 2CA-DM77 - BASTONERA PARA MADERA - 1/4" - 3/4" DIAMETRO - TAQUETES RAYADOSCapacidad de ¼ a ¾ diámetroNueva con garantíaIncluye: 1 cabezal desde ¼" a ¾" diámetro y 1 juego de cuchillas,Diametros a escoger: 1/4", 3/8", 1/2", 5/8", 3/4"Capacidad de 23 a 27 pies por minutoMotor 1 HP, 110/220V, 60 Hz, 1 faseHace ranura en espiral para pegadoHace el palo redondo dese palos cuadradosDisponibles Extras:Cabezal adicional cualquier medidaJuego de Cuchillas de repuestoSPECIFICATIONS:
Diamet...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”
PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”Nueva con garantíaFeaturesStandard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞Wall thickness: 0.04〞-0.19〞Hydraulic power drive, PLC ControlBending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.Easy to operate, reasonable in composition, and l...