Identificador: 2472
Abierta
Descripción
FRESADORA Y TALADRO CNC DE AVANCE CONTINUO
250 – 2200 mm
• Hopper with integrated separation for items with delicate or painted surfaces
• Careful belt transport of items through the machine
Extra
• Waste Conveyer
• Return conveyor with integrated brush cleaning unit
Workstation 1:
Vertical and horizontal independent spindle drilling heads (customer specific)
Workstation 2:
Horizontal drilling groups left and right
Workstation 3:
Vertical and horizontal independent spindle drilling heads, groove blade and milling units (customer specific)
250 – 2200 mm
- Height:
10 – 40 mm - Width:
25 – 300 mm
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDAD
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDADSaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorCore Selling Point: High-AccuracyBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessHydraulic Motor(kw): 0.09Blade Tension: HydraulicCoolant Motor (kw): 1.5Main Motor(kw): 5.5Max. Cutting Capacity(mm): Round:400mm, sqaure:400*710MMBlade Size(mm): 1.1*41*5720
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
DOBLADORA DE METAL 10' X 10 GA
DOBLADORA DE METAL 10' X 10 GA PARTE: 2GM-1010EThis machine has a 7 1/2 HP Motor, rated at 220V three phase.Power bending roll up/down with push button & display. 6.70" RollsSO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for ...
AMXmachinery1
ASTILLADORA - 41 PULGADAS
PARTE: 2TA-WG-4150 - ASTILLADORA - 41 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...