Identificador: 25
Abierta
ID de articulo : # 1828 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-TG-6000 – AFILADORA DE CUCHILLAS RECTAS
Nueva con garantia
Features:
Heavy-duty straight knife grinder, rapid for grinding processing and saving time.
Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.
Automatic grinding table movement forward and backward, label saver.
Employed with straight linear motion guides bearing to ensure longitudinal feed traverse smoothly and accurately.
The knife can be put through a coarse wheel grinding, then a fine wheel grinding for sharpening the knife edge again to obtain the super sharp edge and extend the cutting life of the knife.
Built in coolant pump for faster grinding.
Heavy sheet metal cabinet stand and cast iron body.
High precision and durability.
SPECIFICATIONS | 2TA-TG-3000 | 2TA-TG-5000 | 2TA-TG-6000 |
Grinding Capacity |
|
|
|
Cutter (Dia. x W) | 9" x 8" | N/A | N/A |
Carbide Saw (Dia. x T) | 20" x 3/8" | N/A | N/A |
Carbide Knife (L x W x T) | 12" x 1½" x ¼" | 25" x 3" x 5/8" | 25" x 3" x 5/8" |
Router Bits (Shank) Max. | ½" | N/A | N/A |
Grinding Wheel Size | 6" x 5/8" | 4" x 2" x 5/8" | 10" x 2/3" x 1" |
Grinding Head Travel | 14" | 26" | 26" |
Grinding Wheel Speed | 5000RPM | 1700 RPM | 1700 RPM |
Fine Grinding Wheel Size | N/A | --- | 4" x 2" x 2" |
Grinding Wheel Motor | 1 HP | ½ HP | 1 HP |
Fine Wheel Motor | N/A | --- | --- |
Table Size | 28' L x 8" W | 26" L | 27" L |
Table Travel | 20" x 7" | (Wheel) | 28" |
Table Travel Motor | --- | ¼ HP | ¼ HP |
Coolant Pump Motor | 1/8 HP | N/A | 1/8 HP |
N.W. (LBS) | 748 LBS | 340 LBS | 660 LBS |
G. W. (LBS) | 924 LBS | 430 LBS | 836 LBS |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
PARTE:
1TR-14355 - SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
Nueva con
garantíaEquipo convencional y tradicional: proceso simple de soldadura con
electrodo por arco eléctrico (SMAW)Doble voltaje de alimentación: 1 Fase (110 V) | 2 Fases (220 V)Rango de corriente (CA): 1 Fase (100 - 130 A) | 2 Fases (98 - 210 A)Bornes de cambio rápido: 5/16"
Corriente máxima
210 A en CA
Bornes
5/16"
Ciclo de trabajo
...
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachinery
FINGER JOINT SEMIAUTOMATICO
PARTE # 32M-FJS-005 – SISTEMA FINGER JOINT – SEMIAUTOMATICOEscalable a AutomaticoIncluye:Trompo- Motor Finger 20 HP- Motor Escuadra 5 HP- Motor Mesa 2 HP- Motor Bomba Hidraulica 1/2 HP- Velocidad 3-4 veces/minEnsambladora- Area de trabajo 5000mm largo x 150mm ancho x 75mm alto- Motor Cortador 5 HP- Motor Alimentador 1/2 HP- Motor Bomba Hidraulica 5 HP- Capacidad/min 3-4 piezas/min
AMXmachinery
LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
PARTE: 12350 - LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
USADA - MUY BUENAS CONDICIONESLijadora marca COSTA modelo ACCC3 1350Útil de lijado 1350mmSubida bajada motorizadaIndicación digital altura mesaVariador de velocidad electrónico avance mesa1er grupo rodillo 90shores2on grupo rodillo 80shores3er grupo rodillo 70shoresSoplador en el 3er grupoExclusión neumática en los 3 gruposRegulación neumática 3er grupoNormativas CE
Maqu...