Identificador: 2586
Abierta
ID de articulo : # 2586 se ha agregado a su lista de deseos.
.PNG)
Descripción
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NC
- Meet OSHA and CE safety standard
- 48” NC table back gauge with fingers
- Max. 16 bends per program
- Upto 100 Program Storage
- Programmable Angle/ Angle Correct
- NC ram height control for open hemming
- Hardened fingers and table
- Germany Rexroth hydraulic system
- Yaskawa Servo motors and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
Capacity: Mild Steel(hot roll)60K PSI Stainless Steel 85 K PSI Soft aluminum 28K PSI Hemming max thickness: |
10 Ga. 14 Ga. 1/4" 22 Ga. |
| Bending length capacity | 10' |
| Bend Angel Degree, programmable | 135 degree |
| Max. Box Depth | 153mm=6.02” |
| Large Beam Opening/Clamping Opening | 3" |
| Beam front/back adjustment | 1" |
| Min. Reverse Bend | 1" |
Max. Table Back Gauge Distance Min. Table Back Gauge Distance | 48-3/8" 1/4" |
| Back Gauge Repeatability | 0.0039" |
| Back Gauge Table Height | 35-3/4" |
| Assorted fingers | 3" 4" 5" 6" |
Main Motor
Servo Motor for back gauge |
10HP,220V/208V, 3ph (35amps)
1HP |
Hydraulic Oil Tank Capacity: Recommended hydraulic oil: | 32 Gal. Shell #68 or equivalent |
Machine Weight: Shipping weight: Machine Dimensions: Shipping Dimensions: | 11,550 lbs. 11,850 lbs. 175" x 93" x 76" 163" x 85" x 78" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
AFILADORA PARA SIERRAS DE VAIVEN
PARTE: 2CK-SG-65 - AFILADORA PARA SIERRAS DE VAIVENEquiped with high-accuracy double shafts servo control, extending the life of the saw blade and reducing errors substantially.
Spindle Power
2 HP
Cooling Motor
1/6 HP
X axis servo motor
X axis 100W
Y axis servo motor
Y axis 400W
Controller
Mitsubishi
Machine size
67" x 55" x 65"
(L14...
AMXmachinery1
EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO - PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA
CAL. 20 CON GOTERÓN EN LAMINA CAL. 18 - SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA - INCLUYE FILTROS TIPO LABERINTO
- INCLUYE CAPELOS PARA ILUMINACIÓN - NO INCLUYE DUCTERÍA NI EXTRACTOR
Cantidad de
Capelos
Largo
1
1 m
2
1.5 m
...
AMXmachinery1
PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO
PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO
Nueva con garantía Designed for water-based woodworking glues.Glue is applied to the bottom edge of the stock when the stock is passed by hand across the roll.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The high-quality 6" diameter, 12" wide grooved rubber roll for durability usage.Removable stainless steel glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Floor stand, air re...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...