Identificador: 2589
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 16'' X 60'' PARTE: 2GM-GML-1660HD
16” x 60”, 2-1/16” bore, 6 HP
- ISO 9001 certified
- Large spindle bore 2-1/16”
- Heavy Duty spindle D1-6
- One-piece solid cast iron machine base
- Heavy Duty guideway width 10-1/4”
- Heavy Duty main motor 6 HP
- 16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm
- 45 kinds of inch threads, and 39 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- SINO DRO (installed)
- Taper turning attachment (installed)
- 8” 3-jaw chuck with one set of reversible jaws
- 10” 4-jaw chuck
- 12” Face plate
- 5 1/2” large steady rest with roller jaws (bearings)
- Oil pump on Apron for all guideways and leadscrews
- 2” follow rest with roller jaws (bearings)
- Removeable gap
- 4-way tools post
- Foot brake
- Halogen Work light and coolant system
- Full length splash guard
- (2) dead centers and (1) reducing sleeve MT6/MT4
- Thread chasing dial
- Tool box and leveling pads
| Max. swing over bed | 16 1/16" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 10 1/4" |
| Max. Swing in gap | 23 1/4" |
| Width of Bed | 10 1/4" |
| Effective length in gap to spindle | 8 1/2" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 2 1/16" D1-6 |
| Taper of spindle center | M.T. #6 (MT6/MT4 sleeve) |
| Spindle speeds | 45-1,800 rpm / 16 steps |
| Longitudinal feeds | 0.0018-0.07 IPR, 42 kinds |
| Cross feeds | 0.0009-0.03 IPR, 42 kinds |
| Inch threads | 70-2 TPI, 45 kinds |
| Metric threads | 0.2-14 mm , 39 kinds |
| Diametral Pitch threads | 8-40 DP , 21 kinds |
| Module threads | 0.3-3.6 mm, 18 kinds |
| Max. travel of top slide | 4 1/4" |
| Max. travel of cross slide | 8 1/2" |
Spindle length w/o chuck Leadscrew length X TPI | 20 1/2" 1 1/4" x 4 TPI |
| Diameter of tailstock quill | 2 1/16" |
Max. travel of tailstock quill | 5" |
| Taper of tailstock quill center | MT4 |
| Main motor | 6 HP, 220V/20A, 3 Phase |
| Coolant pump | 1/8 HP, 220V, 3 Phase |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for en...
AMXmachinery1
CEPILLO 2 CARAS - 40 PULGADAS
PARTE: 2CK-GTM120WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head. This wide planer is ideal for increasing production on narrow boards and capable of planning live edge slabs...
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
AMXmachinery1
CANTEADORA
CANTEADORA PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensu...