Identificador: 2648
Abierta
ID de articulo : # 2648 se ha agregado a su lista de deseos.
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTO
AMXmachinery
Descripción
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTO
Usada - Buenas condiciones
HIGH POINT
MODELO: HP-11
MFG. 2004
Motor powered set works for accurate saw wheel elevation.
Digital position controller permits accurate saw wheel height positioning.
Automatic blade tension is controlled by hydraulic cylinder.
Variable feed speed by hydraulic motor drive.
The big pressure roller is air cylinder loaded to hold wood down firmly.
1. Saves Time and labor costs
2. Pneumatic pressure roller infeed
3. Digital position controller permits accurate saw wheel height
4. Easy to operate and set up
Feed speed: 4-27m/min (13-90FPM)
Max. cutting height: 250mm (10”)
Max. cutting width: 300mm (11 3/4”)
Min. workpiece length: 400mm; 205mm with extension set
Max. workpiece length: 580mm
Distance from blade to conveyor: 4-125mm
Saw wheel Diameter: 711.5mm (28”)
Saw wheel width: 22.7mm (1”)
Saw blade size: 4265 x 27mm (168” x 1’)
Blade speed: 2816m/min (9240FPM)
Saw Motor: 15kW(20HP)
Feed unit: 0.75kW(2HP) gearbox motor with frequency converter
Cooling system Oil mist
Blade tensioning
Hydraulic system
Motor for blade positioning: 0.18kW(1/4HP)
Dust post: Ø4” x 4
Table height: 902.5mm
Machine weight: 951kgs
Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
PARTE:
2EB-MDWC1500 - ASTILLADOR A GASOLINA – 13.5 HP – MAX DIAMETRO 4.5”
NUEVA CON GARANTIAElectric
Start (Battery included), Emergency Stop Lever for Safety,Powerful
13 1/2 HP B&S Gasoline Engine, 4-stroke, air-cooled,Efficient
Disc Rotor cutting up to 4 1/2 in. in diameter,360
degrees rotatable Discharge Chute, 2"
Ball Trailer Hitch,Self-feeding
gasoline engine powered that uses a large disc rotor. Compared to most others
which use a drum style processor, this machine is mo...
AMXmachinery
REASERRADORA 3 SIERRAS 12"
PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
LIJADORA DE BANDA VERTICAL
PARTE # 1N-LIJ-010 - LIJADORA DE BANDA VERTICAL - 1.2 MTSLARGO DE LIJADO 1.20 MTSANCHO DE LIJADO 6"MOTOR 2 HP, 220V, 3 FASESOPCIONAL:- MOTOR 2 HP, 110V, 1 FASE
AMXmachinery
JUNTADORA DE CHAPA
PARTE # 11914 – JUNTADORA TRANSVERSAL DE CHAPA PRE-ENCOLADAFISHER RUCKLE FZL-34 DeltaLargo máximo de hoja de chapa 3400mmAncho máximo de cara de chapa 2900/3000mm (Especial)Estación intermediaRepasadora de testas de caras de chapa con TiretaEstación de descarga para ancho de hoja de chapa 2900/3000mm (Especial)Normas CEAño 1997400V/50Hz