Identificador: 287
Abierta
ID de articulo : # 287 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
JUNTADORA DE CHAPA
PARTE # 11914 – JUNTADORA TRANSVERSAL DE CHAPA PRE-ENCOLADAFISHER RUCKLE FZL-34 DeltaLargo máximo de hoja de chapa 3400mmAncho máximo de cara de chapa 2900/3000mm (Especial)Estación intermediaRepasadora de testas de caras de chapa con TiretaEstación de descarga para ancho de hoja de chapa 2900/3000mm (Especial)Normas CEAño 1997400V/50Hz
AMXmachinery
ESTUFA/SECANTE PARA MADERA AMERICAN WOOD DRYERS
PARTE # 10303 - ESTUFA/SECANTE PARA MADERA - AMERICAN WOOD DRYERSSON 2 CAMARAS JUNTAS1 CAMARA DE 43,200 PIES TABLA1 CAMARA DE 38,400 PIES TABLAAMBAS ESTAN DESARMADASSE COMPRARON FUNCIONANDO EN ESTADOS UNIDOS Y NUNCA SE INSTALARONNO INCLUYE LA CALDERATENEMOS 27 PLANOS EN PDF PARA FACILITAR EL ARMADO
-500x500.jpg)
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Since you are load...
-500x500.jpg)
AMXmachinery
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIAL - MOTOR 10 HP - LOREN COOK
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIAL - MOTOR 10 HP - LOREN COOKUSADO - MUY BUENAS CONDICIONESMARCA: LOREN COOK COMPANYMODELO: 330 CPA - EF-1HECHO EN USAFABRICADO EN ALUMINIO - RUEDA
INTERIOR Y CABINA EXTERIOR DEL EXTRACTORESTRUCTURA
DONDE VA EL MOTOR, LA POLEA Y LA FLECHA EXTERIOR DE ACEROMOTOR BALDOR 10 HP, 208-230/460V, 3
FASESMEDIDAS TOTALES: 63” ANCHO X 52”
FONDO X 67.5” ALTOMEDIDA ENTRADA: 41” DIAMETRO
ABERTURA CEJAMEDIDA ENTRADA: 22” DIAMETRO
ABERTURA ADENTROME...