Identificador: 34
Abierta
ID de articulo : # 34 se ha agregado a su lista de deseos.
Descripción
PARTE # 2RT-R200T - TALADRO UNION BASTIDORES - 1 TALADRO
1.5 HP Spindle Drive Motor, TEFC
Manual Controls, 1-Phase, 110 V, 60 Hz
Foot Actuated Boring Cycle
14 Degree Single Spindle
6,100 RPM Spindle Speed
Ball Bearing Collet Guide Bushing Block
24” x 30” Table Area
Adjustable Fence with (2) Stops
Tooling Included
Designed and Manufactured in the USA
Additional options for this machine include:
R200T3 – 1.5 HP 3-Phase 230/460 Volt
His machine is part of the R200 assembly system that includes the R200E/A and is sold separately.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTO
PARTE: 12613 - REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTOUsada - Buenas condicionesHIGH POINTMODELO: HP-11MFG. 2004Motor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor costs2. Pneumat...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...
AMXmachinery
PARTE: 1SE-0020 - FINGER JOINT - TROMPO 7.5 HP
PARTE: 1SE-0020 - FINGER
JOINT - TROMPO 7.5 HP
Nuevo con garantía en
partes mecánicas solamente
Motor 7.5 HP,
220/440V, 3 fases, 3500 RPM - motor usado, checado y revisado
Motorreductor 1.5 HP para
sistema de arreadores
2 estaciones de botones para
paro y arranque
Largo máximo barrotes
48"
Largo mínimo barrotes 24"
Producción 40 barrotes por
minuto
Cabezal Finger Joint de Carburo
de TungstenoVideo: https://vimeo.com/854503314
AMXmachinery
PARTE: 12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
PARTE:
12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
USADA – BUENAS CONDICIONESMod. Eco DS0 Manufacture year 1999
Multi-channel
to cut 4 boards at same timeInclude 1
frame of 500 mm blade and 1 for 400 mm blades.
480 Volts