Identificador: 89
Abierta
ID de articulo : # 89 se ha agregado a su lista de deseos.
Descripción
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050
T-Edge Applicator
- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.
- Standard Features:
- Hammer ½ hp motor
- Pneumatic corner notching
- Electric cutoff ½ hp motor
- 3" Dim. Saw blade 8,000 RPM
- 80 PSI Required
- Crated weight 600 LBS.
- Shipping dimensions 53” long X 40” wide X 50” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15
PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15USADO - MUY BUENAS CONDICIONESSpecifications:Working field for boring & routing: "X" Axis 86.5" (2,200 mm), "Y" axis 35.3" (898 mm) for boring & 37.4" (950 mm) for routing, max. panel thickness 2.5" (65 mm). Positioning speed:"X" axis at 246 FPM (75 MPM), "Y" axis 147 FPM (45 MPM), "Z" axis 49 FPM (15 MPM); "X" axis moves on high precision prismatic guides and ground helical rack; "Y" & "Z" axis via hardened ground ball screw. Work Table:...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
PARTE: 12177 - PEGADORA – 16 SECCIONES – HIDRAULICA
PARTE: 12177 - PEGADORA –
16 SECCIONES – HIDRAULICA
USADA
– EN BUENAS CONDICIONES