Identificador: 925
Abierta
ID de articulo : # 925 se ha agregado a su lista de deseos.
Descripción
PARTE: 12040 –
ESPIGADORA DOBLE DE CADENA - SCM
EN BUENAS CONDICIONES DE OPERACIÓN
MOTORES 220/440V 3 FASES, CONECTADA A 220V 3 FASES
SIERRA CORTE A LARGO
PERFILADOR ARRIBA
PERFILADOR ABAJO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...
AMXmachinery
PARTE: 12517 - EXTRACTOR DE ASERRIN - EXTERIOR
PARTE: 12517 - EXTRACTOR DE ASERRIN - EXTERIOR
USADA - BUENAS CONDICIONES
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...