Identificador: 943
Abierta
ID de articulo : # 943 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HP
PARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HP
PARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HP
ESPECIFICACIONES
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HP
Motor: 10hp,7.5hp,2hp,1/2hp
Maximum width of cut: 405MM
Minimum thickness of cut: 8MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 250MM
Dust hood outlet diameter : 5" x 2
Machine Dimensions (L*W*H): 2300*980*1800MM-PALLET
Net Weight/Gross Weight : 1800/1900 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:405*3*30mm) Q'TY on each cutterhead :4 PCS
PARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HP
Motor: 15hp,10hp,2hp,1/2hp
Maximum width of cut: 610MM
Minimum thickness of cut: 8MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 250MM
Dust hood outlet diameter : 5" x 2
Machine Dimensions (L*W*H): 2300*1160*1800MM-PALLET
Net Weight/Gross Weight : 2200/2350 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:610*3*30mm) Q'TY on each cutterhead :4 PCS
PARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HP
Motor: 20hp,15hp,3hp,1/2hp
Maximum width of cut: 610MM
Minimum thickness of cut: 10MM
Cutter-head speed: 4000RPM
Maximum thickness of cut: 200MM
Minimum length of cut: 310MM
Dust hood outlet diameter : 6" x 2
Machine Dimensions (L*W*H): 2700*1160*1800MM-PALLET
Net Weight/Gross Weight : 2880/3000 kgs
Variable feed speed: 7-24m/min-inverter
Standard cutterhead (HSS knife size:610*6*38mm) Q'TY on each cutterhead :4 PCS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565-E - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MM
PARTE: 12109 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MMUSADOS – COMPLETOS - MUY BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
6,500.00 MXN
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCMI
PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI
USADA - BUENAS CONDICIONESSCMI Concept 2000 •
Opening Capacity: ~4'•
Two-Post Machine• First
Station: Left & Right Trim Saws• Trim
Saw Motors: 8 HP Each• Second
Station: Left & Right Jump-CopeUnits,
7000 RPM• Jump
Cope Motors: 11.5 HP Each• Third
Station: Left & Right Cope Units, 7000RPM• Cope
Motors: 11.5 HP Each• Load
Space: 32"• Rubber
Padded Feed Chains 2.75" Wide• Pop-Up
Dogs on 14-3/4" Centers•
Push-...
AMXmachinery
PARTE: 12502 – MOLINO DE PET – MOTOR 50 HP
PARTE: 12502 – MOLINO DE PET – MOTOR
50 HP
USADO - BUENAS CONDICIONES
CAPACIDAD 2 TONS/TURNO