Identificador: 16
Abierta
Descripción
PARTE # 2RT-R885 - ARMADORA DE CAJONES
14″ x 24″ x 36″ Capacity
Pneumatic Controls
(2) 4″ Bore Clamping Cylinder
Box Alignment Stops
Operator Control Panel
40″ X 72″ Floor Area Required
Designed And Manufactured In The United States
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...
AMXmachinery
LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
PARTE: 12405-7 - LIJADORA DE BANDA
PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PARTE: 2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
PARTE:
2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
NUEVA CON GARANTIAWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motorVideo: https://vimeo.com/668680300
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
from lower ...
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.