ID: 2531
Open
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
CANTEADORA AUTOMATICA PARTE: 2CK-MX350M
- Compact design makes it the ideal edgebanding solution for small workshops
- Pre-milling the panel ensures optimum edge quality prior to edgebanding
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm;
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
- PRE-MILLING
Pre-milling unit with (2) counter rotating diamond cutterheads for precise edge quality. - END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit - TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming - RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required - BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
Feeding speed | 23 FPM | 7 m/min. |
Panel thickness | 0.472~1.77″ | 12~45 mm |
Edge thickness | 0.0158”~0.118” | 0.4 ~ 3 mm |
Minimum panel width | 3.54″ | 90mm |
Minimum panel length | 8 3/4″ | 220mm |
Working table height | 33.7″ | 856mm |
Extraction connection | 3 x 4” | 3 x 100mm |
Air consumption | 8.83 CFM | 250 liters/min |
Premilling spindle speed | 9000 RPM | |
Top & bottom trimmer RPM | 10500 RPM | |
Max. machine dimensions (LxWXH) | 126” x 47 ¼” x 47 ¼” | 3200 x 1200 x 1200mm |
Machine weight | 1162 lbs | 528 kgs |
Shipping dimensions (LxWxH) | ||
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 7.5HP
COLECTOR DE POLVOS - 7.5HP * 2CK-UFO105BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop..5 HP generating 3673 CFMBase is mounted on casters ...
AMXmachinery1
SIERRA MULTIPLE - ALIMENTACION RODILLOS
PARTE: 2CK-SYC300Has been designed to ensure uncompromised results specifically aimed to the company looking to run strip materials like lath, dunnage, stakes, and more. The roll feed design will rip for maximum material yield which helps increase output and margins.Roll feed design achieves maximum yield from the materialHeavy frame ensures smooth running to allow thin cutting of materials like lathFull width top and bottom driven feed rolls assist in smooth feeding of a range of materials ...
AMXmachinery1
CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES
CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES PARTE: 2GM-HBB-0410Our 4 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesISO 90...
AMXmachinery1
LIJADORA DE BANDA ANCHA HEAVY DUTY - 1 A 4 LIJAS
PARTE: 2CK-PRExcel in high production environments and in demanding wide belt sanding applications. Are available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, or combination sanding units (drum/platen) to suit production needs. The digital thickness control allows for precise adjustment of the conveyor belt to 0.001” resolution (0.01mm). Special emphasis has been made for safe operation of this machine with em...