Identificador: 430
Abierta
Descripción
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICA
Nueva con garantia
- Bends up to 2"schedule 40 pipe (1.54")
- Dies available in 120 and 240 degrees
- Dies and all Pins are heat treated
- Bronze bushings at Pivot Points
- Capabilities greater than benders costing 3 times as much
- High quality components and cosntruction
Tube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degrees
Pipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degrees
Weight: 110 lbs ( 50 kg) only includes3 sets dies
Comes with (3) free dies: 1”, 1-1/2” and 1-3/4” with 120 degree for tubing
Optional Packages of dies available:
Package 1 for round tubing: part # PKG1-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
Package 2 for round tubing: part # PKG2-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
2” x 6” radius, 240 degree or 120 degree
Package 3 for round tubing: part # PKG3-HTB2:
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
1 5/8” x 5” radius , 240 degree or 120 degree
1 ¾” x 6” radius, 240 degree or 120 degree
Package 4 for round pipe: part # PKG4-HBT2:
¾” x 3” radius, 240 degree or 120 degree
1” x 4” radius , 240 degree or 120 degree
1 ¼” x 5” radius, 240 degree or 120 degree
1 ½” x 6” radius , 240 degree or 120 degree
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
PARTE:
1ZU-001 - BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
USADA - BUENAS CONDICIONESMOTOR 3 HP, 220/440V, 3 FASES, BALDOR2,500 LBS PRESION3 GALONES/MIN
TANQUE 60 LTS
AMXmachinery
COMPRESORES DE TORNILLO COMPACTOS
COMPRESORES DE TORNILLO COMPACTOSCompresor Secador Tanque de Aire de 500 litrosMODELOMotorAir Delivery / Discharge PressureHPKW0.7Mpa0.8Mpa1.0Mpa1.2Mpa32IG-HD-5C540.65 m3/min0.55 m3/min0.4 m3/min0.35 m3/min32IG-HD-7.5C7.55.50.85 m3/min0.75 m3/min0.56 m3/min0.48 m3/min32IG-HD-10C107.51.3 m3/min1.2 m3/min1.0 m3/min0.8 m3/min32IG-HD-15C15111.8 m3/min1.6 m3/min1.3 m3/min1.2 m3/min32IG-HD-20C20152.6 m3/min2.4 m3/min2.2 m3/min1.7 m3/min32IG-HD-30C30223.8 M3/min3.6 m3/min3.0 m3/min2.6 m3/minVoltaje...
AMXmachinery
EXTRACTOR DE TURBINA - ½ HP
PARTE: AMX-10133 - EXTRACTOR DE TURBINA - ½ HP
USADO - BUENAS CONDICIONES
MEDIDAS: 15” ANCHO X 15” FONDO X 18”
ALTO
ENTRADA REDONDA 5”
SALIDA RECTANGULAR 3” X 2.5”
MOTOR ½ HP, 220/440V, 3 FASES
4,500.00 MXN
AMXmachinery
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.With data storage of 5,000 different frame profiles, the operator can easily recall...