Identificador: 430
Abierta
Descripción
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICA
Nueva con garantia
- Bends up to 2"schedule 40 pipe (1.54")
- Dies available in 120 and 240 degrees
- Dies and all Pins are heat treated
- Bronze bushings at Pivot Points
- Capabilities greater than benders costing 3 times as much
- High quality components and cosntruction
Tube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degrees
Pipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degrees
Weight: 110 lbs ( 50 kg) only includes3 sets dies
Comes with (3) free dies: 1”, 1-1/2” and 1-3/4” with 120 degree for tubing
Optional Packages of dies available:
Package 1 for round tubing: part # PKG1-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
Package 2 for round tubing: part # PKG2-HTB2:
¾” x 3” radius, 240 degree or 120 degree
7/8” x 3” radius , 240 degree or 120 degree
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
2” x 6” radius, 240 degree or 120 degree
Package 3 for round tubing: part # PKG3-HTB2:
1” x 3” radius , 240 degree or 120 degree
1 ¼” x 4” radius , 240 degree or 120 degree
1 ½” x 5” radius, 240 degree or 120 degree
1 5/8” x 5” radius , 240 degree or 120 degree
1 ¾” x 6” radius, 240 degree or 120 degree
Package 4 for round pipe: part # PKG4-HBT2:
¾” x 3” radius, 240 degree or 120 degree
1” x 4” radius , 240 degree or 120 degree
1 ¼” x 5” radius, 240 degree or 120 degree
1 ½” x 6” radius , 240 degree or 120 degree
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 12110-1 - CABEZALES PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60, 100 Y 150 MM LARGO
PARTE: 12110-1 - CABEZALES PARA
MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60, 100 Y 150 MM LARGOUSADOS – MUY BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
AMXmachinery
CEPILLO NEWMAN 500 - 4 CARAS
PARTE:
11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN
500 - 4 CARAS
AMXmachinery
ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA
29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum:
7-1/2"
Throat clearance: 750mm
(29-1/2'')
2 Speed Spindle: 8,100 /
16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position
turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x
101mm (36" x 40")
Table tilt: 45 degree front
downward tilt
Micrometric table raise:
1/32" (1mm) p...
AMXmachinery
SIERRA ESCUADRADORA - 1600 MM – MOTOR 4 HP
PARTE: 1SL-DC-SE1600 - SIERRA ESCUADRADORA - 1600 MM – MOTOR 4 HP
Nueva con garantíaFácil Deslizamiento perillas de ajuste inclinación y altura
del discoCapacidad Max. de Corte 30,4 cm 1 “Conexión para Motor TrifásicoSierra circular 12”Motor 4 HP, 220V, 1 o 3 fasesVelocidad principal: 4,500 rpmVelocidad incisor: 8,500 rpmDiametro disco: 315 mm – 12”Diámetro disco incisor: 9 cmCapacidad de corte 90 grados: 10 cmCaapcidad de corte 45 grados: 8 cmMesa de trabajo: 38.5 x 80 cmMe...