Identificador: 155
Abierta
Descripción
PARTE # 2CA-JDT65 - ENLAZADORA/COLA DE MILANO
Ideal for drawer production and furniture parts which require high quality dovetail joints.
Max. workpiece size 59" x 16 ½"
Workpieces are clamped by air clamps.
Enclosed-type stand.
Equipped with an indication bar for indicating cutting position.
Tenon width can be micro-metrically adjusted in 2 mm.
Tenon and mortise depth are conveniently adjusted according to the thickness of workpiece.
Equipped with one four-sided template providing four types of pitches between dovetails.
Standard pitch 1", 1 ½", 2" and 2 ½” (Other sizes available on request)
The spindle accommodates 12 mm T.C.T. cutter bit.
SPECIFICATIONS
Minimum workpiece size 7.9" x 2.4"
Maximum workpiece size 59" x 16.5"
Minimum dovetail height 0.2"
Maximum dovetail height 0.71"
Minimum front thickness 0.28"
Maximum front thickness 2.36"
Minimum side thickness 0.28"
Maximum side thickness 2.36"
Number of spindles 1
Spindle speed (RPM) 18500 RPM
Center pacing of dovetails 1", 1.5", 2", 2.5" standard
Table height from floor 46.5"
Dust collection ports diameter front 2.5", rear 4"
Air pressure requirement 6 bar
Motor 1 HP
Electrics 230/1/60= 8.0 Full Load Amps
Packing dimensions 42 ½” x 30" x 65 ½”
N.W. / G.W. 440 lbs / 510 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 4CV-43101-0 - SIERRA MULTIPLE VAIVEN – 15 HP
PARTE: 4CV-43101-0 - SIERRA MULTIPLE VAIVEN – 15 HPNUEVA CON GARANTIASaws motor power: 15 HpAdvance speed: 0,3 - 1,7 m/minCutting height: 30 - 200 mmMin. piece length: 300 mmFrame thickness: 1,1 - 3 mmWeight: 2500 kgAdvanced technology, stable and reliableMaximum number of sawing motion is 480 times per minuteSaw blade loss: 0.9, 1.2, 1.4 mmSuitable for heavy bamboo sawing, flooring, shutter, guitar, wall panel and so on.Machine dimensions: 3600 x 880 x 2500mm
AMXmachinery
LIJADORA DE TAMBOR 25"
PARTE # 2SM-913002 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 1 FASEPARTE # 2SM-913102 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 3 FASESSPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537...
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...
AMXmachinery
MOLINO PARA PELLETS - DIESEL
MOLINO PARA PELLETS – PARA ALIMENTO ANIMALLos molinos para alimento animal, están hechos para hacer pellets de materiales suaves como granos y pasto,Pueden hacer pellets para combustible de pasto, tallos, hojas de pino y papel,Pueden hacer pellets de aserrín combinado con otros materiales, pero estos equipos no se recomiendan para hacer pellets con 100% aserrín,El material a procesar debe estar seco y tener un 13% de humedad con partículas mas chicas de 6 mm,Se recomienda usar un triturado...