Identificador: 170
Abierta
Descripción
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERY
Nueva con garantia
- Built with two working tables for high efficiency operations.
- Table longitudinal traverse is pneumatic operated for smooth cutting.
- Tenon’s width is easily adjustable by hand wheel.
- Convenient tenon depth adjustment from outside without removing covers.
- Table can be tilted to 20 degrees at each side for angular tenon.
- Cutter moving speed is infinitely adjustable to achive the best results.
- Pneumatic hold down clamps and pneumatic cutting movement for smooth finish.
- Fully automatic tenon produce cycles.
- Automatic lubrication system.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA VERTICAL ELCON - SERIES EDGE
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGEPARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGEPARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGEPARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE The New EDGE.Trendy and eye catching design and well equipped.Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigi...
AMXmachinery
PART: AMX-10200-E - COUNTERTOP SAW - 5 HP
PART: AMX-10200-E - COUNTERTOP SAW - 5 HPNEW WITH WARRANTYSAW BLADE 14”MOTOR 5 HP, 220V, 3 PHASESTARTER INCLUDEDMACHINE MEASURES: 1.5 MTS WIDHT X 1.3 MTS LENGTH X 1.1 MTS HEIGHTTABLE HEIGHT: 27.5” (70 CM)OPTIONAL:MOTOR 5 HP, 220V, 1 PHASE
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
TORNO COPIADOR CON NAVAJA TRASERA – GOODSPEED
PARTE: 12165 – TORNO COPIADOR CON NAVAJA TRASERA –
GOODSPEED 168A
USADO
– EN BUENAS CONDICIONES
CAPACIDAD LARGO: 4” – 26-1/2”
CAPACIDAD DIAMETRO: 1/2” – 4”
MOTOR PRINCIPAL: 7-1/2 HP, 3 FASES,
60 HZ, 1800-3200 RPM
MOTOR BOMBA HIDRAULICA: 3 HP
CAPACIDAD DE PRODUCCION: 4 - 7 PIEZAS/MIN
PESO CON EMPAQUE: 4,150 LBS
ELECTRICOS:
208V, 3 FASES
* ENVIENOS EMAIL PARA
RECIBIR TODAS LAS FOTOS, INFORMACION Y DISPONIBILIDAD