Identificador: 2020
Abierta
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONES
Model Contouramat
The ideal solution for double-end trimming and coping, with only one operator required!
Working Length: 115 - 1500mm (4.52" - 59")
Working Width: 30mm - 250mm (1.18" - 9.84")
Working Thickness: 12mm - 50mm (0.47" - 1.96")
Configuration: Double-End Trim & Double-End Cope/Profiling
Left & Right Trim Motors: 4 HP Each
Trim Blade Diameter: 125mm - 180mm
Trim Blade Bore: 30mm
Left & Right Cope/Profiling Motors: 7.4 HP Each
Profiling Cutterhead Diameter: 160mm - 220mm
Cope/Profiling Spindle Diameter: 40mm
Cope/Profiling Spindle Speed: 6,800 RPM
Motorized/Programmable Open/Close
Dual Return Conveyor Belts
460v, 3ph
Year: 2005
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA CONTINUA 2 LADOS
PARTE # EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
PARTE: 12582 – CHAFLANADORA -UNKNOWN
PARTE: 12582 – CHAFLANADORA -UNKNOWNUSADA – BUENAS CONDICIONES
AMXmachinery
CLAVADORA NEUMATICA PARA TARIMAS
PARTE # SIL-DC-AT3092 - CLAVADORA NEUMATICA PARA TARIMASNUEVA CON GARANTIALONGITUD DE CLAVO: DESDE 1-3/4" HASTA 2-3/4"90-110 PSI, 6-8 CFM, 168-220 LTS/MIN
AMXmachinery
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL – CNC – HASS VF-6/50
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL –
CNC – HASS VF-6/50
USADO – BUENAS CONDICIONES
2015
HAAS VF-6/50 &
HRT310
Type: Vertical
Machining Centers
Category: Machining
Manufacturer: HAAS
Model: VF-6/50
Year: 2015
Description
HRT310 Rotary Table,
4th Axis Driving & Wiring, 8" Column Riser, Renishaw Probing,
Through-Spindle Coolant, CAT50 Taper, only 1,500 Spindle Hours. This 2015 Haas
VF-6/50 & HRT310 are in plant, under power and available i...