ID: 2208
Open
Description
PARTE: 12494 - ENCHAPADORA DE CANTOS – BRANDT KDN 210
USADA – MUY BUENAS CONDICIONES
BRANDT KDN 210
220V, 3 Fases, 60 HZ, 2007
Mantenimiento de Homag 2 veces por año
Poco uso – 5 hrs por semana aproximadamente
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO - TEKMAK
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO
- TEKMAK
USADOS - BUENAS CONDICIONES
Revisados - Baleros nuevos
Motor ½ HP, 220/440V, 50/60 Hz, 3 fases, 1720 RPM
Medidas totales: 20” largo x 15” fondo c/u
Altura total minima: 17.5” c/u
Altura total máxima: 19.5” c/u
Rueda pulidora: 1.5” ancho x 8” diámetro c/u
Hecho en ItaliaEl banco donde estan puestos actualmente donde se tomaron las fotos no esta incluido
AMXmachinery
REASERRADORA 1 SIERRA 12" ECO
PARTE # 2TA-BS-1212BEE - REASERRADORA HORIZONTAL - 1 SIERRANUEVA CON GARANTIASingle saw head configuration.Manual saw wheel elevation.Variable feed speed by electric motor drive.Manual blade tension adjustment by a handle.Rubber pressure roller.SPECIFICATIONSBS-1212BEEMax. Workpiece Sizes (W x H)300 x 300 mm Distance From Blade to Conveyor Table5 - 130 mmConveyor Belt Sizes285 x 5470 mmSaw Wheel Diameter28" x 1" (W)Feed Speed5 - 25 m/minSaw Blade Size168" x 1"Saw Wheel Motor20 HPConveyor Motor2...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...